What is the method of indoor rapid lighting?

According to the discipline, environment and other factors, comprehensive selection.

When shooting still life indoors, the brightness of the light source is good, or use a tripod, pay-off, etc. , evenly fill the light, and correctly adjust the color temperature (white balance is set on the camera), you can shoot with constant light;

If the still life is large, the ordinary light source can't cover it completely or the brightness is insufficient, it is recommended to use a flash lamp, and it is best to use a multi-lamp combination to eliminate the shadow, and install a soft light cover for each lamp to make the light disperse evenly.

1, always bright is what you see is what you get, the light is generally scattered softly, and the color temperature is low (yellowish) and it feels warm; Disadvantages are low brightness, long exposure time and easy jitter.

2, the flash is mainly high brightness, which can prevent camera shake; However, the light concentration is high (usually a little explosive), the color temperature is high (blue), and the effect is difficult to predict (or it is difficult to measure light manually). ).

3. As for the soft box, look at the specific needs. Because the soft mask is used to ensure uniform exposure. Generally speaking, product shooting is to let people clearly see the performance of the product, so it is more reasonable to use soft mask. If it is to create a "hard" feeling, such as the formation of shadows and obvious local brightness contrast, there is no need to use soft masks.

Extended data

Techniques to avoid using the wrong light when taking pictures.

1, find the right light at the right time.

When you come to a strange shooting scene, it is actually very difficult to find the best shooting position in a few minutes before the sun goes down and the lighting angle is constantly changing. Therefore, check the local sunset time and sunshine angle in advance, and make a shooting plan in advance, including the estimated illuminance, scenery and composition, and don't run out without preparation. Then, whether it is a golden dome or a translucent church, it is more confident to shoot.

2. Local highlights

When shooting during the day, due to direct sunlight, illuminating objects and scenes will lead to highlights in local small areas, which can enliven the atmosphere and enhance the interest and rhythm of the picture, but it may also destroy the integrity of the picture, which has both advantages and disadvantages. When this local bright spot appears, make the best use of it.

There is no need to shoot directly.

Different from the well-known positive and positive light shooting, putting light directly into the lens can make people break into the new field of photography. If your lens is aimed at a mountain, a statue or a figure, try to put the subject between you and the sun, so that the glare of the sun will enter the lens from the edge of the subject or the edge of the picture. The main body and edge of the lens block the direct light and bring unforgettable picture elements to the audience.

4. Keep the light shield by your side.

Insist on shooting every day, it is not difficult to find that clouds cover the sun, not enemies, but can become friends of shooting. Shooting interesting and mysterious subjects in foggy days, or soft diffuse light caused by thick clouds, can make good use of clouds and sunlight to shoot more natural and aesthetic pictures.

Baidu encyclopedia-indoor photography

Xinhuanet-What are the skills to avoid using the wrong light when taking pictures?