How to connect a Sony camera to a computer

1. Connect the data cable configured for the camera to the USB interface of the computer. As shown in the figure

2. Then turn on the camera power switch. As shown in the figure

3. Check whether the camera displays USB mode. As shown in the figure

4. Click to enter the camera memory card after the connection is successful. As shown in the figure

5. locate the PRIVATEWE folder and select the AVCHD folder. As shown in the figure

6. Just copy the required information into the AVCHD folder. As shown in the figure

Extended data:

(1) When using a home video camera, don't aim the lens at the light source for a long time, so as to avoid the lens shooting the same scene for a long time, especially in the case of large contrast between light and dark.

(2) Before the home camera is connected with other TV equipment, all power supplies must be cut off.

(3) After using the home camera, close the aperture, cover the lens, turn off the power switch, unplug the power plug or take out the battery.

(4) When the camera is adjusted and used, it should avoid the magnetic field to avoid image jitter and distortion.

(5) Avoid using the camera in places with high humidity, dust or corrosive gas.