How to mount the camera on a tripod

There is a small flat plate on the tripod where the camera is placed, called a gimbal. There is a small screw head on the front of the gimbal, and a handle to turn the screw on the back. There is a universal-sized screw hole at the bottom of the camera. Place the small screw head on the platform against the small screw hole in the camera base and rotate the screw handle on the back of the platform until it is tightened. Then the camera can be fixed to the platform.

Some pan/tilts can be disassembled (separate type), and some are fixed on a tripod (integrated type). The detachable head needs to be removed and tightened before being installed on the tripod to fix the camera to the tripod. The integrated head needs to be tightened directly to fix the camera to the tripod.

Extended information:

A few points to note when positioning the tripod:

1. Use the lifting function of the tripod, take out the tripod before use, unfold it and rotate the rocker To the working height, the working height is equal to the height minus 30 cm.

2. You can use the joystick to adjust the working height of the lens.

3. Open each leg to the maximum limit.

4. Adjust one of the legs of the tripod directly below the lens to shoot, and the other two legs face the direction of the photographer so that they will not collide with the tripod when taking pictures.

5. Find the horizontal line.

Baidu Encyclopedia-Tripod