How does a young man without a college degree conquer western technology to create value for the country and be reused by the central government?

I don't insist on having a dream, but I insist on making my dream clearer. -Hong Guangjia

In this era when academic qualifications are paramount, it is basically impossible to find a good job without a college diploma. Not to mention a good job, it is not certain whether you can find a job. Now, unlike when New China was just founded, a college diploma is already the most basic diploma for a person to enter the society. But is there no good job without a college degree? Not exactly.

A young man without a college degree.

From 65438 to 0979, Hong was born in the countryside of Shenyang, and his family was very poor. My father was an ordinary farmer and my mother was an educated youth who went to the countryside that year. Hong is a good boy and has been considerate of his parents' hard work since he was a child. At the age of seven, Xiaohong Guang Jia worked with his mother, who was a garbage collector in the community.

Every morning, Hong goes out with his mother before dawn. There are no buildings in rural Shenyang, but every family is a bungalow, and every family will put their domestic garbage at the corner of every alley. Together with his mother, Hong collected the garbage on each street and put it in a unified place for centralized treatment.

In the interview, the host once asked him: "In the past 20 years, many of your classmates or colleagues gave up this job because of hard work. What kept you going? " He said: "It was his mother's childhood education that taught him to persist." It was his mother who insisted on this job in spite of the wind and rain when he was a child, so that he learned to insist on his job.

Hong, who graduated from junior high school, began to work this morning to subsidize his family in order to reduce his study time. I chose a technical school to study and wanted to learn a skill and start working. Liming technical school learns machine tools. During school, Hong's home is far from school, and he has to take a bus for four hours every day. The classmates in the same car are reading comic books and sleeping in the car.

Hong Guang Jia thinks he wastes too much time in the car. He can't waste time in the car like his classmates. He should use his time in the car. Therefore, Hong reads books in the car every day and teaches himself professional courses. During his three years in school, Hong studied four professional books. He turned the bus into his own library.

In a blink of an eye, Hong's three-year technical school time has passed. Thanks to Hong's efforts, he graduated from Liming Technical School with the first place. At that time, after graduating from Hong Technical School, he was assigned to Workshop 58 of Shenyang Liming Aero-Engine (Group) Co., Ltd. ..

Hong, who just graduated from a technical school, came to the workshop. The equipment in the workshop is outdated, and the workshop is old and small. Hong's dream is to build a big plane for the country, but here, he can't see his dream or plane. All I see is dilapidated factories and repetitive work every day. He not only began to ask himself, is this job worth continuing to work hard, and can he realize his dream if he goes on like this? Is it really impossible to succeed without a high degree like others, a strong background and rich parents? Hong's heart has never experienced such hesitation.

Meet an old-timer

In this hesitation, Hong went on with his work. After all, you have to work to support your family, and you have to work. Just in the year when Hong took part in the work, something happened that made the people of the motherland angry but helpless. The US bombing of the Embassy of China in Yugoslavia resulted in 3 deaths and 20 injuries in our country. Since there was no domestic self-developed plane at that time, we still needed American planes to transport the bodies back to China. This incident deeply touched Hong, who was determined to develop his own plane for our country.

At this time, an old master of the factory also persuaded Hong: "Young man, you are also an aviation man!" " "The master told Hong that with the detailed distribution of work, most people's work is like a part in a big machine, repeating the same work every day, but this does not mean that your work is not important. On the contrary, every small job is ultimately related to the operation of the big machine. Your work is not repeated every day. In fact, your work standards and quality change every day.

At first, Hong didn't fully understand the master's meaning. But he understood a truth, he can't get along like this any longer, and he should work hard in his own work. At this time, he found that there were several national and provincial model workers in his factory. He decided to learn from them. Hong understands that his work is not unimportant, and his work is also related to the great cause of the motherland. In the future, he will start to work hard, do what he likes and drill what he does.

It was not until I met Meng Xianxin, the master of the same factory, that Hong understood the meaning of the master. Master Meng Xianxin is a national model worker in the same factory. His technique is very good. Ordinary people can only process parts on a lathe at a speed of 600 revolutions per minute. If the speed is fast, they will cut the knife. Master Meng Xianxin can actually turn the speed to 1200 rpm when working. At this time, Hong Ming understood why he said that his daily work was different and he could improve his work level every day!

Desperate Saburo Taihong Jiaguang

Hong worshipped Meng Xianxin as a teacher. In the following days, Hong began his hard practice. Working overtime on the lathe every day, his skills have been honed through constant hard practice. In a few years, others can only work 4000 hours a year in the factory, but he can reach 7000 hours.

In 2000, the company's production task was very heavy. Hong simply moved his family to the factory, worked overtime every day, and slept in the factory when he was tired. Due to excessive fatigue, I accidentally broke my finger while lifting heavy objects. In order not to delay his work, he didn't go to the hospital and insisted on working every day.

At night, Hong couldn't sleep with his hands in his arms. The worker saw that he was really dying and took him to the hospital. Upon examination, it was a comminuted fracture. The doctor told him that he must rest for three months before he can recover. However, Hong is really stubborn, and lying at home thinking about the work in the factory is also uncomfortable. After not lying in bed for three months, Hong Guangjia returned to the front with gauze in her hand.

Sweet comes from bitter.

With the Spring Festival approaching in 2002, the company has an urgent task, that is, processing a diamond roller, a calibration tool for key engine core blades. The production process of the core blade correction tool requires extremely high precision, and the dimensional error required by the workpiece cannot exceed 0.003 mm.

This technology has always been the key technology to produce aircraft engines. If China wants to independently develop aircraft engines, it must learn this technology. But at that time, these foreign key technologies were kept secret from China. First, we should block technology and constantly sell engines abroad to make money. Second, we should prevent other countries from catching up with their own countries in technology after learning.

In order to accomplish this task, Hong began to make it according to the original technical means of the master. After more than ten hours of production, none of the workpieces meet the requirements. Hong Guangjia was exhausted and sat down on the ground. That night, Hong stayed up all night in bed, wondering whether he could finish the task. After a night of thinking, Hong decided to stick to it.

Since then, Hong has been working 14 hours every day, and practiced and improved this method again and again. In this way, he persisted for more than ten days and finally solved the problem. Mastering this core technology has created a value of 85 million yuan for our country, won the second prize of national scientific and technological progress, was reused by the central government, and became the chief skill expert of Shenyang Liming Aeroengine Group.

There was once a story that said, "An ordinary person may have to struggle for ten years before he can sit in Starbucks and have a cup of coffee like a rich boy." Most people think this is a sad thing. However, he doesn't think that the rich second generation only drinks coffee, and everyone who has struggled has tasted the happiness brought by hard work.