How to do time-lapse photography of Elf 4?

Time-lapse photography is shown in the following figure:

1. Fly the plane to the starting position and switch to "Intelligent Flight" mode.

2. Select "waypoint flight".

3. Click "Create Task".

4. After selecting the starting point, select "Record waypoints 1".

5. Then go back to the starting point and start the task. (pay attention to the speed must be as slow as possible. )

6. Then, start flying according to the recorded waypoint, press the shooting button, he will automatically shoot at the interval of 2s, and the plane will slowly fly to the destination at a predetermined speed.

Extended data

Tips for time-lapse photography:

1. Stability is the most important thing. Be sure to fix the camera firmly on a solid tripod to avoid the camera shaking due to wind and other reasons, which will lead to shooting failure.

2. Avoid unnecessary sundries from entering the screen. If shooting on the road, in order to prevent pedestrians from entering the picture, the camera must be placed away from the sidewalk.

3. Prepare enough spare batteries and memory cards. Time-lapse shooting usually takes several hours or even dozens of hours, so it is necessary to prepare enough accessories according to the length of the required material. If conditions permit, it is best to turn on the alternating current to shoot.

Pay attention to the protection of machines. Because it takes a long time, in order to protect the safety of the camera and avoid the damage caused by natural and human factors, we must pay attention to taking good care of the camera when shooting in time delay, and avoid exposure and low temperature at the same time.