Traditional Culture Encyclopedia - Photography and portraiture - How long does Zhiyunyun Crane 2s take away?

How long does Zhiyunyun Crane 2s take away?

about 5 cm.

Although Yunhe 2S is a typical right angle stabilizer, it can actually be transformed into an oblique angle stabilizer. Users can manually unscrew more than ten screws at the corner of the stabilizer arm by using a screwdriver, and then reassemble. This kind of design is forward-looking. For people with severe stabilizers, the design of opening brain holes expands the use scene and adds more playability.

complaints about the instability of the stabilizer are often seen in various photography groups, but in fact, many of these cases are caused by improper leveling before starting the stabilizer. Just take this opportunity to briefly explain the leveling of the stabilizer. Firstly, place the stabilizer in a horizontal place, such as a stable desktop or ground, put the camera in the stabilizer from front to back, keep it horizontal, make the camera vertical to the ground in the state of letting go, lock all the locks, and then open the corresponding locks when adjusting a certain axis. The second step is to adjust the pitch axis. Because of the lens, the camera usually tilts forward, so it needs to be moved backward through the pitch axis to balance it. After the adjustment, the tilt button will be locked. The third step is to adjust the balance of the horizontal roller according to the left-right deviation of the camera. If the left side is heavy, the horizontal roller should be moved to the right side, so that the camera is level with the ground finally. Remember to lock the horizontal roller lock. The last step is also the most easily overlooked step for beginners-course axis adjustment. First, open the lock of the heading shaft, and move the heading shaft in the opposite direction according to the tilt direction of the camera. When it is horizontal to the ground, lock the lock and complete all stabilizers.