How to make people feel more textured?

1. How to make this photo relatively textured?

1. First, I make a choice for the character's skin. Here I use the quick mask tool. You can use other tools if you are interested. .

2. Add the mask to the unselected selection, correct the transparency selected by the quick mask, and copy the two layers for later use.

3. Use the first layer of the copied skin to "filter"/"blur"/"surface blur", and you adjust the data according to the picture in your hand. The data is not a fixed value, depending on the adjusted skin effect.

4. Select the copied second layer, put it on the top layer, and execute Filter-Other-Customize. The data execution effect here is to sharpen the details. You can study the specific parameter settings and consult the principle of custom filters.

5. Set the blending mode of sharpening layer to light color, and adjust the opacity with the mouse until you are satisfied.

However, this method is suitable for the mask with inconspicuous "acne" on the face, and this method can be used after a small area can be repaired with a repair tool. I suggest you have a try.

2.2 How? PS produces such a textured photo?

I have written such a tutorial to accurately calculate the selection by calculation, as shown below: The following channels are all used to calculate the selection.

Brighten the gray and highlights of the picture, so that the layering of the whole picture comes out. It can be adjusted according to your own needs.

Specific operation: press and hold the ctrl key in the dark area and click the thumbnail to get the dark area, and then highlight the picture with the curve: the adjusted contrast picture, the left picture is the original picture; Use the same steps to properly highlight the gray area and highlight area to get the following picture, and the right picture is the original picture: we can see that the adjusted layering is good and the exposure is more accurate by comparing the above two pictures, and there are many ways to get this effect, such as adjusting the curve or color scale separately, as long as you think it can be done. If you want to present the texture of skin color, you need to throw away the thick yellow and red in the picture first, and then artificially add color to the film.

First, remove the saturation of red and yellow, then create a new blank layer and fill {c94c09} with the required color. Change the blending mode to soft light and adjust it with opacity. Every film is different, so don't memorize the parameters. Create a hue saturation adjustment layer, reduce the saturation to adjust the hue, and adjust it according to your own purpose during the adjustment process, as shown in the figure: seal the layer, and then polish it properly. I use a plug-in to grind the skin, as shown in the figure: hyperbola strengthens shadows and highlights, and establishes two curve adjustment layers, as shown in the figure: and then draws highlights and shadows in the mask, as shown in the figure: the drawing effect of shadows on the left and the drawing effect of highlights on the right.

Fine-tuning the overall effect, such as saturation contrast and liquefaction. This step should be adjusted according to personal hobbies.

The last step: use the sharpening tool to sharpen the outline of the five senses. The final comparison chart is as follows.

3. How to use PS to make human muscles more textured?

If you like to draw with a brush, you'd better use a brush. In this way, after you create a new layer, you can start to draw your face with a brush (in fact, you can directly fill the selection), and then select "Soft Light" in the layer mode-adjust the transparency of the layer. Also, if the effect of pink is not so obvious, it is suggested to draw the curve on this layer (try it yourself). Finally, buckle a selection to your face, then deselect it and delete Feather 2. Because the original picture is no longer in my hand and the software used is different, I can't determine the value!

Liquefaction should be used for injustice (if only liquefaction is used, it will only make you fat)

Brushes and deepening tools are also used to deepen the dark parts of muscles.

You can find a picture of a muscular man to compare.

4. How to make the skin of the person in the photo smooth and delicate?

Of course, there are many ways to grind the skin.

Personally, I think the effect of grinding skin with historical brush is more real.

Tutorial steps:

1, open the picture to unlock = filter = blur = Gaussian blur (12)

2. Create a new snapshot (below the history panel layer)

3. Set the source of the historical brush on the snapshot.

At the same time, history has been made public again.

5. Set the history brush, reduce the opacity (20-40%), and start to smear the skin on the picture.

6. Finally, adjust the brightness with CTRL+M curve. Then use CTRL+U to adjust the saturation.

7. Merge layers, OK.

Original post address: /mb/2/readnews? newsid=498078

5.PS makes the characters clear, the skin smooth and the texture improved.

The quality of the original picture is too poor, and my level is limited. That's all.

You can also ask other experts to help you. PS blurred picture becomes clear: Tip: The clarity of the picture has been decided at the time of shooting, and it is impossible to make the blurred picture clear.

All the tools and methods only deal with the edge of the image, and the effect is very limited, which can only improve the blur slightly. Commonly used tools are: 1. Use the sharpening function in the filter.

You can adjust the parameters yourself. If you are uncertain and save trouble, you can choose the smart sharpening item.

2. Use the Sharpen tool in the toolbar. Pay attention to the brush diameter and small strength and hardness.

3. Filter method: Use USM sharpening tool of filter: Settings: small radius, large value and minimum threshold. 4. Overlay method: copy the layer, remove the color, set the filter-Other-Gao Fancha Reserved-value to about 0.9, and confirm.

Set the layer blending mode to: overlay, copy the layer, and you can copy several layers and overlay them on it. The stain can be wiped off with an eraser.

5. Channel method: Select a channel, and select a channel with higher quality, such as the red channel as the working channel. Copy the red channel as a copy of the red channel.

Filter-Stylization-Illuminate the edges. Gaussian blur of red channel copy.

Adjust the red channel copy with color code. Set the foreground color to black, and use the brush tool to remove the parts that don't need sharpening.

Select a selection, then load the red copy channel as the selection, return to the layers panel, copy the background layer, and keep the selection. Perform Filter-Artistic Effect-Smudge.

Then copy the background copy to the background copy 1, move the background copy 1 under the background copy layer, change the transparency of the background copy 1 to about 30%, and select the color filter. 6. Use some external filters.

For example, noiseware.8bf filter: copy the downloaded filter to Plug-Ins\ filter. When using, open the filter and adjust the parameters such as sharpness.

"TOPAZ" filter: copy the downloaded filter to Plug-Ins\ filter. (If it has been installed before, use software to remove it before installation. ) As for smooth skin, it can be treated with dermabrasion software.