(Panasonic) Panasonic AJ-PX298MC camera, how to format AJ-P2M064AMC memory card?

Panasonic AJ-PX298MC model is a high-definition camera compatible with P2 Micro P2 and SD card. When recording with SD card, you must complete the following settings, otherwise you will not be able to record:

1. Please format the SD card in the machine first, and never format it on the computer. Insert the SD card into the MicroP2 card slot on the back of the fuselage or the SD card on the right side of the fuselage (this card slot is recommended for upgrading and formatting SD cards), enter the shooting browsing page, press the menu key to select clips, and then select the card slot for formatting;

2. Please select Micor P2 as the recording medium in the recording settings of PX298/285. The method is to press and hold the menu keyboard for 3 seconds (press the menu key for common menus, and then say the main menu), and enter recording settings-recording media selection-select Microp 2；;

3. Please choose the recording format of PX298/285 as follows: ACV-I50/50i, because SD card can record the highest 100M code stream, and P2 card can record 100 and 200M code streams; The method is to enter the main menu-System Mode-Recording Format-and select AVC-I50/50i. As long as I don't choose I 100 format, the SD card can record this part!

After the above three steps, the SD card can record video. If not, please check whether the SD card write protection is turned on, or the firmware version of your machine is low, and high-speed SD cards such as U3 may not be able to burn. Please upgrade the firmware.

PX298/285 SD card can record a high bit stream of 50M, but SD card can't record special shooting such as variable frame shooting and interval shooting in various recording formats.