Traditional Culture Encyclopedia - Photography and portraiture - How to Disassemble the 360 Suspension Camera

How to Disassemble the 360 Suspension Camera

1. Remove the base: Remove the base of the 360 hanging camera. You can unscrew the screws on the base with a flat tool such as a screwdriver, and then remove the base from the camera.

2. Remove the housing: use a flat tool to find a gap in the housing of the camera, insert it gently, then twist it slowly until the housing is loose, and then gently remove the housing.

3. Remove the camera module: You can see the camera module after removing the housing. The camera module is generally fixed on the motherboard. You can use a flat tool to gently loosen the connecting cable on the camera module, and then slowly remove the camera module.

4. Remove the motherboard: After removing the camera module, you can see the motherboard, which is connected with various circuits and components. You need to remove the related components and circuits as needed, and then remove the motherboard from the camera.