How to use Minolta 220x flash?

Minolta 220x is a classic flash for camera photography. The following is about how to use Minolta 220x flash:

1. Check the battery: make sure that the battery of the flash is fully charged. Use a new battery to ensure a reliable flash effect.

2. Install the flash: Install the flash on the hot boots of the camera. Make sure that the lamp cap is fully inserted, and rotate the lamp cap as needed to obtain the proper irradiation angle.

3. Turn on the flash: Under normal circumstances, the start flash will pop up automatically. If there is no automatic ejection, please press the manual ejection button on the flash to eject manually.

4. Set flash mode: Minolta 220x flash can provide various flash modes, such as manual, automatic and TTL modes. Choose the appropriate mode according to the shooting scene and requirements.

5. Adjust the flash output: the output power of the flash can be adjusted as needed. You can increase or decrease the brightness of the flash by rotating the adjusting ring on the flash.

6. Synchronization setting: Select the correct synchronization mode according to the shutter synchronization mode of the camera. There are usually two options: automatic and manual.

7. Reflector and diffuser: According to the shooting requirements, you can use the reflector and diffuser on the flash to change the direction and intensity of light.

8. Shooting: After confirming that the camera and flash are set correctly, press the camera shutter to shoot.

Please note that this is only a basic guide. The setting and operation of each camera and flash may be different, please refer to the relevant instructions or consult a professional for more detailed guidance.