Are those celebrities studying civil engineering?

Liu Ke is from Youxian County, Hunan Province. 1936 graduated from the Civil Engineering Department of Wuhan University. From 65438 to 0938, he entered Yan 'an Kangda School. Joined China in the same year. He used to be the director of the Political Department and General Political Department of the Eighth Route Army Field Army, the deputy director of the Political Department of the Second Guard Corps of the Eighth Route Army Left-behind Corps, the director of the Propaganda Department of the Re-Liao Military Region, the director of the Political Department of the Cavalry Division, and the director and detachment leader of the Railway Column of the Northeast Field Army. Participated in Liaoshen, Ping Jin and other battles. 1950 Participated in the War to Resist US Aggression and Aid Korea, and served as commander of Chinese people's Volunteer Army Railway Corps, acting commander of the emergency repair command post of China-DPRK United Front Railway Transport Command, and technical deputy commander of Railway Corps. After returning to China, he served as deputy commander and minister of scientific research of the Railway Corps. 196 1 year promoted to major general. Won the second medal of independence and freedom and the second medal of liberation.

Sun Wei (female) (1935.11.16-) is an expert in civil engineering materials. Born in jiaozhou city, Shandong Province. 1958 graduated from Nanjing Institute of Technology in July. He used to be a professor and doctoral supervisor, head of the Department of Materials Science and Engineering of Southeast University, and deputy editor-in-chief of Journal of Silicate. He is currently the director, professor and doctoral supervisor of the Institute of Fiber and Fiber Concrete Technology of Southeast University, and the deputy director of the International Editorial Advisory Committee of Journal of Silicate.

Sun Wei has been engaged in teaching, scientific research and personnel training in the field of civil engineering materials for a long time. Mainly engaged in high-performance concrete, high-performance and ultra-high-performance fiber-reinforced cement-based composite materials, high-performance protective engineering materials, basic theory, application technology, structural formation and damage deterioration mechanism, industrial waste residue resource utilization, new theories and methods for durability evaluation and life prediction of structural concrete under the action of composite factors, etc. It has undertaken more than 40 national, provincial and ministerial key and general projects such as the National Natural Science Foundation, major engineering projects and international or overseas cooperation projects. It won the third prize of national invention "Performance Design and Construction Technology of Steel Fiber Reinforced Concrete Pavement", the first prize of Jiangsu Province's scientific and technological progress "Evaluation and Failure Mechanism and Life Prediction of High Durable Concrete", the first prize of Ministry of Education's scientific and technological progress "Design and Construction Regulations of Steel Fiber Reinforced Concrete Structure" and the second prize of provincial and ministerial natural science and technological progress. More than 300 papers have been published, among which SCI and EI included 126, and SCI cited 100. Editor-in-chief of English Collection of International Conferences, New Development of Concrete Science and Technology, and main editor-in-chief of monograph Steel Fiber Reinforced Concrete Structure. 30 doctoral students and 36 master students have been trained.

In 2005, he was elected as an academician of China Academy of Engineering.

Yin Yanliang, born in 1950, is from Rizhao, Shandong. Dr. Taiwan Province Political University, now an adjunct professor and doctoral supervisor in Peking University, an adjunct professor in the Institute of Civil Engineering of Taiwan Province University, the president of Runtai Group in Taiwan Province Province, and concurrently the chief engineer, engineer and director of R&D in the construction industry. Since 1995, Japan and Finland have introduced precast technology into the construction industry in Taiwan Province Province, and have been engaged in the research and development and improvement of precast building structure construction technology for a long time. In the way of industrialization and mechanization, we have developed various automatic production technologies and produced a large number of precast concrete members. In recent years, the technology of rapid workshop has been developed, and the efficiency of high-tech workshop has been improved by assembly construction, which can be completed within 100 days at the earliest, greatly improving the construction level, which is in line with the characteristics of rapid cycle of high-tech industry. Mr. Yin Yanliang has devoted himself to the research and engineering practice of architectural methods for many years. He has published 0/2 papers and 3 monographs, and has 68 patents from China, Japan and the United States. In 2004, it was awarded the honor of "Meeting the Earth" by the Civil and Hydraulic Engineering Society of Taiwan Province Province, China, and the project contracted by Runtai Construction Enterprise was awarded the highest honor "Gold Award" in the engineering field of Taiwan Province Province.

Born in August 1950, originally from Rizhao City, Shandong Province. He graduated from the History Department of China Cultural Institute in Taiwan Province Province, the American International Cotton Institute and the Graduate School of Business Studies of Taiwan Province University. He used to be the chairman of Runtai Group, and 1993 resigned. Later, he served as President of Runtai Group, Managing Director and General Manager of Runtai Industrial Company, Chairman and General Manager of Runtai Leasing Company, Chairman of Runtai Construction Company, and Standing Supervisor of Runtai Dyeing and Weaving Factory Company, Runtai Advertising Company and Runtai Construction Company. A well-known young entrepreneur in Taiwan Province Province, the core figure of Runtai Industrial Enterprise Group. His main business is Runtai Group, and his net wealth in 1995 was NT$ 175 billion respectively, ranking 20th in Taiwan Province Province 100 rich list. 1989 Invested in the establishment of Guanghua Education Fund and served as its Director-General. Co-founded Guanghua School of Management with Peking University as a director.

Zheng was born in a farmer's family in Shangyanting Village, Chengtian Town, Chaoyang County. The date of birth is June 1935 65438+ 10/0. 1954 was admitted to the Department of Civil Engineering of Tsinghua University in Beijing and has been teaching in this department since graduation. Professor Zheng has been teaching for more than 40 years, and has taught courses such as surveying, GPS satellite survey, electromagnetic wave rangefinder, error theory and application, application of photogrammetry in ancient buildings, remote sensing technology and urban and rural planning, cadastral survey and measuring instruments to students and advanced students. Offering courses such as precision engineering survey and urban traverse survey for graduate students. At the same time of teaching, Professor Zheng studied the main courses of radio major in Tsinghua University Radio Department in combination with the needs of scientific research. The electrical instruments developed by him in the 1950s for adjusting circuits and nodes were taken abroad by our delegation to participate in international conferences and exhibitions. In 1960s, as the main member of the research group of light speed rangefinder, the first and second generation light speed rangefinders were successfully developed in China for the first time, and passed the ministerial appraisal and reported to the State Science and Technology Commission. Among them, the second generation of light speed rangefinder was delivered to the factory for production, and dozens of light speed rangefinders were put into operation before and after, which became the first batch of light speed rangefinders produced in China, and played a positive role in promoting the popularization and application of this new technology at that time. In the 1970s, his work in precision engineering surveying included: firstly, the application of Monte Carlo method in surveying and mapping was introduced to China, and some innovative research results were obtained; Introduction, analysis and induction of precision engineering measuring instruments and methods, and summary of related problems; Suggestions and suggestions are made for the precision engineering survey in the construction of Beijing Electron Collider in China, and the direction of precision engineering survey is increased for the training of graduate students of engineering survey in Tsinghua University. In 1980s, he made progress in satellite geodesy. Under the condition of few personnel, no equipment and lack of funds, he actively explored new ways to carry out his work by holding training courses, undertaking or participating in GPS projects, technical consulting, software and hardware application development and so on. "'92 China GPS Battle" was supported by the relevant ministries and bureaus, and the actual measurement was successful, and the civil GPS backbone control network in China was established.

Professor Zheng has presided over and led the survey team to implement 10 many survey projects, including GPS survey, urban and engineering control survey, topographic survey, road, power transmission line, water source and waterway survey, etc.

Professor Zheng has also made great achievements in writing. He personally participated in the compilation of 6 editions of Surveying (won the first prize of excellent teaching materials in the school) and 4 teaching reference books; He also published (translated) 65,438+000 articles (volumes) in 65,438+05 periodicals and national academic conferences, including Journal of Tsinghua University, Engineering Construction, Bulletin of Surveying and Mapping, Journal of Nature, Essays on Architectural History, Newsletter of Surveying and Mapping Technology, etc., about 65,430. In addition, he also initially evaluated three textbooks, about 1.7 million words. At present, he is also the consultant of the Coordination Committee of the National Land and Ocean Satellite Positioning Network, the director of the special precision engineering survey research center, and the director of the evaluation committee of the national standard "Specification for Precision Engineering Survey".

Ding Dajun, male, born in April 1923, was born in Wuwei, Anhui Province. Professor, doctoral supervisor. Graduated from Anhui University. He is a member of the New York Academy of Sciences. He is still the chairman of the 26th professional committee of the American Committee on High-rise Buildings and Urban Residential Areas. Part-time job in nearly 20 academic organizations at home and abroad. 1993 Retired from the School of Civil Engineering, Southeast University. 198 1 was approved by the State Council as the first batch of doctoral supervisors, and trained 3 1 person with more than 70 masters. Completed a series of concrete and masonry tests and 10 batch long-term load tests for 23 consecutive years, with the longest time reaching 6 years, which was the highest in the world at that time; The suggested calculation of stiffness cracks in flexural members has been adopted by the national design code (TJ 1974). Cooperative research on replacing cast iron well pipe with reinforced concrete well pipe, the drilling depth can reach 830m, and it has been built and produced several times in the country, saving a lot; Improve the confining hoop theory of masonry under local compression, put forward to criticize the three-dimensional compression theory of masonry with transverse reinforcement abroad with diffusion theory, establish a new theory that small brick columns with transverse reinforcement can avoid premature instability and improve strength, and put forward a new spiral reinforcement to save more than half of steel; The structural mechanism is studied, and the finite basic component method (FFMM) is established to calculate plates and shells. A variety of simplified calculations and approximate unified foundation models are proposed. 1967 puts forward a new shear force calculation considering the influence of compression, tension and prestress for the first time in China. 1967 and 1983 respectively put forward the continuous formula of lateral displacement of eccentrically compressed members and the calculation of crack width along the protective layer for the first time in the world. Instruct graduate students to complete the research on automatic seismic control system and other damping of high-rise buildings, with three limitations and practicality; Presided over 4 international conferences, visited 26 countries and 2 regions, and was invited to serve as consultant and academic member of international conferences in more than 10 countries for more than 30 times; 40 lectures in 3/kloc-0 universities and 4 national scientific research institutes abroad, and lectures in more than 30 universities and many research institutes and design institutes in China, totaling 100 times, nearly 2000 hours. Published 38 textbooks, reference books and monographs, as well as a collection of poems. Published more than 280 Chinese papers in more than 40 journals; In the collection of papers from international conferences, 60 papers were published in English and 94 in 10 language, published in 36 international journals in 20 countries, and nearly 70 of them were published in 24 international authoritative journals.

Doctor of Wood Engineering-Peng Feng Classification: Feng Mingren 2007.5. 17 14.48 Author: worldfengshiweb | Comments: 0 | Reading: 750.

Lecturer, doctor of civil engineering

Place of Birth: Yao County, Shaanxi Province

Address: Department of Civil Engineering, Tsinghua University 100084

E-mail :fengpeng@tsinghua.edu.cn or fengthu@yahoo.com.cn

Main experience

1983.9-1993.1Yaoxian Cement Factory Children's School in Shaanxi Province

1993.1-1995.7 Tongchuan No.1 Middle School, Shaanxi Province

1995.9-2000.7 Graduated from Class 5/kloc-0, Department of Civil Engineering, Tsinghua University, with a bachelor's degree in building structural engineering.

July 2000-June 2005 1 Institute of Engineering Structure, Tsinghua University Civil Engineering.

From February 2005 to August 2005, he was a postdoctoral fellow in the Composite Materials Laboratory of Lehigh University, USA.

2005.3- Lecturer, Department of Civil Engineering, Tsinghua University