How to shoot a ceramic bottle? Can I use the photographic light?

From the above picture, the lights are messy and the original texture is gone.

If there are photo light boxes in the market, create a small shooting environment and choose one according to the size of porcelain that is often photographed.

It is necessary to eliminate stray light as much as possible, such as: no spotlight or less spotlight (one or two), shooting in a completely dark environment, and the brightness can be created by three or four diffuse lamps, which is the best.

If the glaze is highly reflective, a polarizer can be used on the lens.

Fix the phase frame on the tripod for stability.

Select the sensitivity shooting below 200 degrees and cancel the automatic sensitivity.

According to the size and diameter of porcelain, choose the appropriate aperture, keep the depth of field and highlight the focus. Forget the shutter speed.

White balance needs to be determined according to the color of porcelain or the required color, as well as the nature and brightness of the light used. You can tune it while watching it.

Try not to use automatic exposure, and use M block instead.

Try not to use autofocus, choose the focus point according to the part of porcelain that can best express texture or pattern, and focus manually.

View exposure value according to the exposure compensation table in the view frame. By adjusting the shutter speed, make the exposure indicator (flashing) close to the middle position from the "-"direction, and try to take a photo at one level lower, two levels lower or three levels higher.

Try a few more times and wish you success.