Why can't you record it?

1. First, check whether the monitoring device has turned on the monitoring video function. Because many monitoring software need to open the video manually, if you don't open the video, you can't find the video file naturally. 2. If the video is turned on normally, turn on the video management of the monitoring equipment and check the type of video used. At present, many monitoring devices support motion detection video. Video recording will only be turned on when moving objects pass by, and the video recording function will be turned off after moving objects pass by. The main purpose of this setting is to save hard disk capacity. If there is no passing object in the camera monitoring area, the video file can't be found. 3. Video surveillance video is stored on the hard disk, so the monitoring equipment is also called hard disk video recorder. If the monitoring equipment and video recording equipment are normal, then check whether the monitoring equipment can find the hard disk. 4. If you can find the hard disk through the hard disk management of the monitoring equipment, you can format the hard disk first, and then reset the video of the monitoring equipment. If you can write data on the hard disk, it proves that there is no problem in monitoring the quality of the hard disk. If you can't find the hard disk through the monitoring equipment, you need to remove the cover to check whether the power supply and data cable of the hard disk are normal. 5, monitoring equipment video settings are normal, hard disk troubleshooting, and then through the monitoring equipment video playback function to find the stored monitoring video files, click on the video playback.