Hikvision Monitoring Installation Tutorial and Configuration

Hikvision monitoring installation tutorial and configuration are as follows:

Brand model: Hikvision

System version: Hikvision v3.0. 1

Software Version: Camera Settings

1. First, we need to connect the device, then we need to connect our device according to the figure below, and we need to make sure that the link should always remain on the device in the next settings. This is the operation of this step.

2. When we finish the first step, we need to modify the IP of the network camera, so we can directly connect the IPC with the computer with a network cable to modify it. This is the operation of this step.

3. If our webcam defaults to IP 192.0.0.64. To access IPC, we need to modify our PC to a section of 192.0.0.xx, which is the whole process of Hikvision monitoring installation.

4. Other items can be set to the above or the default settings. Do not check "Enable DHCP". After completing the above settings, click "Apply" in the lower right corner of the screen. In More Settings, set the relevant port number. If your IP is unstable, you can use Hikvision's domain. After completing the above settings, click "Apply" in the lower right corner of the screen.