Traditional Culture Encyclopedia - Photography and portraiture - How to install a range hood Introduction to the installation of range hoods
How to install a range hood Introduction to the installation of range hoods
What is a hood?
Hood is a device installed at the front of photographic lens, digital camera and video camera to block harmful light, and it is also one of the most commonly used photographic accessories. The hood is made of metal, hard plastic, soft rubber and other materials. Most 135 lenses come standard with a hood, and some lenses need to be purchased separately. Different lenses use different models of hoods and cannot be used interchangeably. Hood is an indispensable accessory for visible light lens!
How to install the range hood? Method introduction
First, remove the lens ring, install the lens cover adapter, and install the lens cover. Put the upper part of the camera down, and then insert the hook into the lens cover adapter. At this point, press the hood alignment mark, as shown in the figure. Finally, fix the screws, check whether the screws are fixed, and then install the hood.
Introduction to hood installation
The function of the hood is to prevent stray light from entering the lens and causing streamer. When using this camera in strong light, it is recommended to use a hood. This hood should not be used with the built-in flash, because it will make shadows appear. To install the hood, align the rectangular pit on the edge of the hood with the focus indicator on the lens barrel:
Put the hood in the front of the lens and rotate it 90 clockwise until it is fixed. At this point, the circular pit should be aligned with the focal length indicator. When installed correctly, the large hood on the hood should be in the up and down position. Do not forcibly install the hood. If you can't register, please check whether the location is correct. To remove the engine hood, turn it 90 counterclockwise and take it out.
When the camera is not used, the hood can be installed upside down. When one of the big covers is installed on the lens, put the cover in front of the lens and rotate it 90 degrees clockwise until it clicks. When the camera is covered with the lens cover, the hood can also be installed or removed. To remove the engine hood, turn it 90 counterclockwise and take it out. Under bright sunlight or backlight, the lens hood will minimize lens flash and ghosting. The hood can block the extra light and improve the picture quality. Check whether the camera is turned off and whether the lens is retracted. Turn off the flash.
Bian Xiao has introduced the installation method and precautions of range hood for everyone. Friends who like taking photos and photography must be very familiar with the installation method of range hood! So for ordinary people, you can also learn how to install a range hood. After all, cameras are products that we often touch. You need a camera to take clear photos when you travel in the future. As for other aspects of the camera, you can learn more about it later. I believe that after a long time, everyone will naturally become familiar with this kind of products.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp; Wb, you can get it for free ~
- Previous article:Composition analysis of real scene
- Next article:What is a negative?
- Related articles
- What about Linyi Zhou Yong Trading Co., Ltd.?
- Are the Cannes Film Festival awards divided into Best Actor and Best Supporting Actor?
- Which majors in boys' technical secondary schools have good prospects?
- Five tips on how to take a beautiful wedding photo.
- Excellent knowledge composition
- Which is more fun, Xidi in Anhui or Hongcun?
- Which one should I choose between Canon 60d and Canon 6d?
- What hotels does Huawei own?
- Car owners and friends should pay attention to the knowledge of car maintenance after the rain.
- Where is the recruitment point of Meituan takeaway in Baiyun District?