What is steel velvet?

Question 1: What is steel velvet and is it used for editing? Steel velvet is a polishing material, which is mainly used for grinding and polishing stone products (which can be waxed and polished), metal products and wood products.

Question 2: What is steel velvet? Steel wool is a polishing material, which is mainly used for grinding and polishing stone products (steel wool can be waxed and polished) P metal products and wood products.

Commonly used steel velvet has the following 3+ 1 species.

1, steel velvet polishing pad

Although the fiber is tough but soft, the product is thick and fluffy, which is beneficial to high adsorption and minimal blockage. Used with polishing machine, it can be used to polish floors in families, hotels and shopping malls to remove surface, stains, wax or polish beautiful parquet floors and clean all kinds of uneven floors. It can also be used to polish hardware workpieces.

2. Steel velvet with soap

It is made of traditional steel velvet and imported synthetic detergent and dye. It has excellent decontamination and rust removal performance and can be widely used in sanitary ware, cabinets, family bathrooms, hotels and office buildings. It is simple and convenient to use. Just dip a little water on the surface of the object to be cleaned and rub it back and forth gently until foam appears, and the dirt can be removed after repeated times.

3, steel velvet handmade block

Corrugated outside, increase friction, squeeze a proper amount of detergent, wet can clean cookware, porcelain, floor.

4. Steel velvet sandpaper

It is beneficial to the polishing of wood products or metal handicrafts, with excellent polishing performance and good flexibility, and is especially suitable for polishing hard-to-reach corners and irregular parts. Widely used in domestic and foreign manufacturers to polish pianos, high-grade furniture, picture frames, copper doors of star-rated hotels and other handicrafts.

Question 3: What material is used to produce steel velvet? It's steel wire for steel wool Its main chemical components are 0.08 ~ 0. 15% carbon and 0.60% 1.25% manganese. Its strength is 883~ 1030MPA, elongation is ≥8%, and its diameter is φ 30 mm. It is made of φ6.5mm coil by cold drawing. Before the finished product, it has to undergo an intermediate heat treatment. Then, by controlling the appropriate heat treatment parameters, the mechanical properties of the finished steel wire are ensured and the appropriate internal structure is obtained. This ensures the continuity of steel wool when steel wire is processed into steel wool, reduces the debris, and generally the cotton yield can reach more than 80%. At the same time, the cutting speed and tool durability are close to the level of similar steel wires in the United States, which conforms to the characteristics of steel velvet processing technology.

Question 4: Introduction of steel velvet Steel velvet is a polishing material, which is mainly used for polishing stone products (steel velvet can be waxed and polished).

Question 5: What is steel velvet? A belt with a certain width is composed of a plurality of continuous fibers. Fibers are generally divided into 8 types from coarse to fine: 4#, 3#, 2#, 1#, 0#, 00#, 000#, 0000# and finer 00000#, but they are rarely used in China. The finer the fiber factory, the softer it is, and the cotton belt with finer fiber feels as soft as cotton, so it is also called steel cotton.

Question 6: Where can I buy steel velvet? In what store do you sell it? Hardware store

Question 7: No.0000 steel wool is equivalent to sandpaper. This corresponding polishing is sent to you for reference:

No.0000-No.00: It can be used for final polishing of paint surface.

No.0, 1: Remove surface scratches caused by paint and polished stone.

No.2 and No.3: Remove the old paint and brighten it.

No.000-No.00: It can replace the polishing of pumice (light stone).

No.0: It can replace pumice (light stone) or fine sandpaper for polishing.

No.65438+No.0-4: It can be polished instead of sandpaper.

Question 8: What other functions does steel wool have besides polishing? It's best used in cars! ! Ask for advice! ! Steel velvet is a polishing material, which is mainly used for grinding and polishing stone products (which can be waxed and polished), metal products and wood products. Commonly used steel velvet floor mats Steel velvet polishing mats have the following 3+ 1 species. Although the fiber is tough, its texture is soft, and the product is thick and fluffy, which is beneficial to high adsorption and minimal blockage. Used with polishing machine, it can be used to polish floors in families, hotels and shopping malls to remove surface, stains, wax or polish beautiful parquet floors and clean all kinds of uneven floors. It can also be used to polish hardware workpieces. Steel velvet soap pad Soap-containing steel velvet is made of traditional steel velvet and imported synthetic detergent and dye, which has excellent decontamination and rust removal performance and can be widely used in sanitary ware, cabinets, family bathrooms, hotels and office buildings. It is simple and convenient to use. Just dip a little water on the surface of the object to be cleaned and rub it back and forth gently until foam appears, and the dirt can be removed after repeated times. Steel velvet hand pad The steel velvet hand block is corrugated to increase friction. Kitchen utensils, porcelain, and floors can be cleaned by squeezing a proper amount of detergent and getting wet. Steel velvet paper steel velvet sandpaper is beneficial to the polishing of wood products or metal handicrafts, with superior polishing performance and good flexibility, especially suitable for polishing hard-to-reach corners and irregular parts. It is widely used by domestic and foreign manufacturers to polish pianos, high-grade furniture, picture frames, bronze doors of star-rated hotels and other handicrafts.

Question 9: sometimes polishing with steel wool and chemicals will not be very bright. What products are thrown? What are the reasons?

Question 10: What is left after burning steel wool? Can you make magnetic fluid? More than 99% of steel wool is iron, and it is ferroferric oxide after burning. Shall we use ferroferric oxide as magnetic fluid?

Give it up, young Xia. Although ferroferric oxide is magnetic, the particles in magnetic fluid are all nano-scale, and the general granulation process is far from meeting this particle size requirement.

Don't think about grinding it casually, adding it to the base liquid will become magnetic fluid ... The particle size of artificial grinding is in the millimeter level, and it will all precipitate in a few minutes.

As for the preparation of nanoparticles, search online. It is impossible to get results from such a serious academic problem.