Will power failure affect the camera?

Introduction: Will power failure affect the camera? In fact, this problem is easy to solve. As long as you calculate how much power the camera needs before installing the camera, it will not happen after the installation is completed. If there is a problem of insufficient power supply to the camera, it will not lead to damage to the camera power supply and damage to the camera. Does a power failure have an impact on the camera?

Of course a power failure has an impact on the camera.

When DC power lines and AC power lines are too close, interference will occur. In addition, when the lines are struck by lightning, the voltage will also rise and fall suddenly. To prevent the occurrence of these problems, it is recommended that you choose a DC line power supply with a voltage stabilizing device.

1. The first is that the power supply interferes with the camera.

Because during the transmission process of the camera power supply cable, it will be affected by external interference, such as lightning and AC voltage. If this happens, it will have a great impact on the camera, so when installing the camera power cable, do not place the camera power cable too close to the AC cable.

2. The problem of insufficient camera power will also affect the camera.

The problem that affects the camera is the blurring of infrared night vision, which means that the image of the infrared camera is normal during the day, but the night vision effect will be very blurry at night. If you observe it yourself, you will find that the brightness of the infrared light panel is not high. The cause of this problem is insufficient power supply. Why is the power supply insufficient? That is because there is sufficient light during the day and the camera lens can capture enough natural light for the CCD sensor to image, and the infrared light is turned off at this time. Because the infrared light board consumes more power, when the infrared light is turned on at night, additional power consumption is added, which leads to the problem of insufficient power supply to the camera.

3. There is no picture displayed in the camera video.

After the project installation is completed, you will find that the camera has no image display during the debugging process. This is also a problem caused by insufficient power supply of the camera and the camera cannot start. Why does this problem occur? It is that when installing the camera, it is not calculated how much power the camera requires, so it must be calculated before installing the camera. How much power does the camera need?

4. No image display in the video

After the entire project is installed, it is often found during the debugging process that the infrared camera has no image display. Such problems are mostly caused by insufficient power supply and the camera cannot be started. In order to avoid such problems, we need to calculate the power supply at the beginning of installation. For relatively scattered monitoring points, it is not recommended that you choose centralized power supply. power supply.

5. Special stripes appear on the surveillance screen. If the infrared camera surveillance screen image displays normally but special horizontal and vertical stripes often appear, then you need to consider the power supply voltage issue.

Solution: As long as you calculate how much camera power the camera needs before installing the camera, there will be no problem of insufficient camera power supply after the installation is completed, and there will be no problem due to the camera. Insufficient power supply causes camera power supply damage and camera damage.

Helian Electronics has been professionally built for 16 years and is an industry benchmark! Security monitoring: good quality, good solutions, good service! Integrated operation, efficient and safe!