Traditional Culture Encyclopedia - Photography and portraiture - How to set the recording format or output format of Sony PXW-FS7 camera?

How to set the recording format or output format of Sony PXW-FS7 camera?

You can download a format converter to convert the video format into mp4 format and play it normally.

Parameter introduction of Sony fs7:

The product type of this camera is a high-definition camera, and the product positioning is a professional camera, which supports lens replacement. The sensor type of this camera is Exmor CMOS, and the LCD screen of this camera is 3.5 inches, which is relatively large.

Its screen pixel is 6.5438+0.56 million pixels. The shutter description of this camera is 1/3- 1/9000 seconds, and the minimum illumination is 0.7 lumens. At the same time, it also has a built-in microphone, which is relatively easy to use.

Not only the memory is relatively large, but this camera can also have an external memory card, so don't worry about the memory problem.

Sony fs7 teaching:

1. Install the camera battery pack into the camera battery slot correctly and remove the memory recorder jack cover.

Insert the terminal of the memory recorder that has been correctly inserted into the CF card into the jack of the memory recorder and slide the recorder down. When you hear a click, it means that the recorder has been installed.

2. Turn the power switch of Z5C camera and set it as camera.

When the machine enters the normal state, turn the power switch of the memory recorder to the "ON" position, and the small LCD will light up. Press "MENU" on the recorder to enter the menu, select "SETTING" and then enter "CAMLINKSEL".

Select "HYNCHRO" in the menu, which means we can exit the menu. Press the CAMLINK button, the CAMLINK icon on the small LCD screen should light up, and the CF card icon will always light up. The memory recorder is set.

3. Enter the menu, first select "I/O Recording" and then select "External Shooting Control".

Enter the shooting control mode selection menu, where there are four options. The fourth option "external only" is to control the recording and stopping of HVR-MRC 1K with the RECSTART/STOP button of the camera.

When we select "External only", the external shooting mode of the camera LCD and CF card is displayed normally. Machine setup is complete.