How to use a tripod head

Abstract: For a photographer, tripods and heads are familiar. Tripods and heads are one of the most important auxiliary equipment for photography. They can provide a movable platform for camera equipment to facilitate composition. , using a tripod and a head properly can enhance our photography. But it is not easy to make good use of these things. How to use the tripod head? How to disassemble the tripod head? The editor below will teach you how to use and disassemble the tripod and gimbal correctly. 1. How to use a tripod head

1. First of all, we must understand the basic components of a tripod. In fact, a tripod is divided into two parts: a tripod and a head.

2. The gimbal is divided into rack parts, one is the top part where the camera is placed, and the other is the gimbal control part. There are generally four control valves, the top one is mainly used for disassembly and installation, and there are three in the body part, which mainly control different functions.

3. The top rack control valve generally has a level. After loosening the valve and pressing the protector, you can pull out the quick release plate and then screw it on the bottom of the camera. Note that it is best after tightening it. Use a coin to twist again to make sure it is secure.

4. Tripods generally have three rubber valves. This is mainly used for telescopic tripods. Just rotate the rubber valves when retracting the tripod.

5. Finally, there is a pole in the middle of the tripod. This pole is for extending the height. There is a rotating valve at the top of the tripod. After unscrewing the valve, you can pull the pole up. After use, Then just restore it to the original state.

2. How to disassemble the tripod head

1. First, find a rotatable round button at the connection.

2. Then twist it clockwise to separate it from the gimbal.

3. Then support the gimbal with your hands to remove it.

4. Then disassemble the bracket, pull the horse's hoof upward, separate it from the leg tube, and then remove the bracket.

5. Then retract the casters, press the silver button, and turn the casters.

6. Finally, the disassembly of the entire tripod head is completed.