Traditional Culture Encyclopedia - Photography and portraiture - Parameter setting of Canon 6d fountain at night.

Parameter setting of Canon 6d fountain at night.

Do you use M file or TV file! I still suggest you use TV files! M gear is fully manual. I guess you can't control it! As follows:

1. Use TV files (shutter priority) and the camera will automatically match the aperture value for you;

2. Slowly adjust the shutter value from 0.3 seconds to a few seconds! Take a slow look at the shooting results of each shutter value (even experts have to do this), and finally choose the film!

3. It is said that 6D has a good sense of height. You can raise the ISO to below 1600 (about 400- 1600), because raising the ISO with a fixed aperture and shutter is equivalent to raising the exposure of the picture (1600 is less than about 3200, not to mention more than 3200! Image quality is damaged, it is best to shoot at the lowest ISO)

4. The most important point! If you want to make silks and satins, just let the water in the fountain not see the appearance of water droplets continuously, and shoot them by the above method! If you want to see the water droplets one by one, you should at least set the shutter to around1125 (preferably higher than 1/250). In this case, ISO may need to be improved! The aperture should be larger (for example, F2.8 is larger than F5.6, and the larger the number after F means the smaller the aperture, and vice versa)! It would be better to shoot with RAW if you can PS! Don't use RAW if you can't tune it, or you can use RAW+JPG format!