Installation method of projector curtain bracket

Installing the projector curtain bracket requires the following steps:

1. Prepare tools

Prepare tools such as electric drill, screwdriver, hammer, ruler and ladder.

Measuring position

Choose a suitable position, measure the size of the curtain and the height of the wall with a ruler, and determine the position of the bracket.

3. Install the wall fixing plate

According to the measured position, attention should be paid to the material of the wall when drilling and installing the wall fixing plate on the wall. Different materials need to use different screws and anchors, but also pay attention to the flatness of the wall.

4. Install the cross beam

When installing the beam on the installed wall fixing plate, it is necessary to ensure the levelness of the beam, and the distance between the beam and the wall is equal to the length of the curtain.

5. Install the bracket

Connect the projector curtain bracket and install the bracket on the beam with screws.

Hanging curtains

Hang the curtain on the bracket, and pay attention to straighten the curtain so that its surface is flat to avoid foaming or wrinkling.

adjust

Finally, the alignment between the curtain and the projector is ensured by adjusting the height and angle of the bracket and the position and straightening degree of the curtain.

These are the steps to install the projector curtain bracket. It should be noted that each brand of projector curtain bracket has different installation methods and special requirements. It is necessary to read the installation instructions carefully and install them according to the instructions, and follow the correct installation steps to ensure the firmness and stability of the bracket.