How to create a photo filter to resize a layer How to create a photo filter to resize a layer

PS course "Neutral Grey Grinding", the method of retouching in the later stage of the studio

Neutral grinding is very fine. When operating, carefully observe the skin of each pixel of the face, and then adjust the light and shade with a brush or a deepening fade-in tool to eliminate defects and restore skin texture. As for the later stage, it can be directly colored, or it can be decolored and then colored.

original drawing

Post-processing renderings

1. Open the image copy layer and roughly trim it with a tool similar to spot repair to remove obvious spots on the face.

2. Create a new group 1 at the top of the layer and name it "Observation Group". Create a layer in the group, fill the black layer mode with "color", copy a layer, and change the layer mode to "Overlay". If the overlay effect is too dark, you can reduce the opacity of the overlay mode layer, and finally enhance the contrast with curves.

3. Create a group named Decoration Group below the observation group and above the freckle removing layer. Create a new layer in the group, and change the mode of filling 50% gray layer to soft light.

Set the foreground color of the brush to white, soft-edged brush, opacity to 100%, and flow to 1%.

Enlarge the canvas, and gently wipe the darker part in the middle with each pixel as a unit to make it transition evenly with the periphery. Set the foreground color to black, and gently wipe the brighter part in the middle in a single pixel unit to make it evenly transition with the periphery. This step requires patience and more practice.

4. After peeling, close the eyes of the observation group. Create a color scale value on the neutral gray layer as shown below. This is done to enhance the brightness of the face.

5. After color coding, wipe off the neck and background with a mask.

6. Create a hue saturation adjustment layer with the saturation reduction point.

7. Create a photo filter adjustment layer, and select a color with a concentration value of #f 1cdab of 100%.

8. Create a curve adjustment layer to highlight the whole.

9. Create optional color adjustment layer values as follows.

10. Keyboard Ctrlshiftalte Seal Layer Filter-Other-Gao Fancha Keep the radius of 0.3, change the layer mode to linear light, and then erase the edge with a mask.

PS Dermable tutorial later portrait finishing in PhotoshopStudio.

PS tutorial: peeling with neutral ash, peeling with neutral ash quickly.

Complete collection of photography skills-using light, color and shutter

E-commerce, 10 late intensive training mistakes!

PS Tutorial: Analyze in detail how to refine high-definition diamond ring pictures.

PS retouching and whitening are not real retouching.

The most comprehensive baby bag tutorial in history, super cute sleeping baby photography appreciation

The tall but beautiful photos are definitely a visual feast and a journey to beautify the soul!

Look at the works of the world's top photographers!

Creativity has nothing to do with age, but how you play.

Learn picture layout design with movie posters.

Rapid production of photo tearing effect by PS basic self-study tutorial

PS Self-study Tutorial Quickly Making Photo Edge Effect

PS mouse painting tutorial mouse painting cute cartoon panda

How happy it is to have a father who knows PS.

Ps toner tutorial portrait photography late toner

Learn to shoot lotus flowers, and you will know how to color them!

How to save underexposed photos in Ps tone tutorial

Ps Basic Course How to Quickly Deice with Mask

Color matching theory that every designer has to deal with in PS later tutorial

PS tutorial unveils the magic veil of mask, which is simple, rough and super practical.

Use of PS Tutorial Mask and Cut Mask

Novice PS tutorial super practical tips, don't just watch, open the software and try it!

Learning to read histograms will bring you closer to professional photographers!

Ps tutorial uses the channel to pick hair as the background.

PS basic course: seven methods of matting, which are very easy to use and efficient.

introductory course

How does ps change a layer into a usable lossless filter?

Select the layer, then right-click, select Convert to Smart Object, and use the filter.

A more direct method is to use the lossless filter by selecting "Use Smart Object Filter" under the filter menu after selecting the layer.

Photoshop filter tutorial?

1. Open your photo and make some simple adjustments. Image >; Automatic coloring, image >; Automatic contrast, image >; Automatic tone.

We need to fill the background with solid color. Let's create a new solid color fill layer and click Layer > in the navigation bar. The new > layer is called "background color" and the fill color number is #d6cdb2.

3. Select the background layer and click the navigation bar layer >; New > copy the background layer from the copied layer, and then drag the newly copied layer to the top of the background color map layer. Press the D key on the keyboard to reset the swatch, and then click Filter >； on the navigation bar; Filter Gallery > Sketch Effects > Photocopy

4. Name this layer "Basic Sketch" and change its blending mode to "Positive Overlay".

5. click on the navigation bar layer > new > copy the basic sketch layer by copying the layer, and press the shortcut key ctrl+T to freely transform the graph, so as to enlarge the graph to about 105%.

6. Select the "Basic Sketch" layer and click the navigation bar layer >; New > copy the basic sketch layer by copying the layer, and press the shortcut key ctrl+T to transform the graph freely, reducing the graph to about 95% of its original value.

Simple filter settings?

The simple filter setting method is as follows:

Open simple software and import a material picture.

Right-click the layer to which you want to add a smart filter in the layer bar and choose Convert to Smart Object.

Click the converted smart object layer, and then click Filter in the menu bar.

Then, select Gaussian Blur in Blur from the drop-down menu of the filter.

Set the blur radius to 12 and click OK.

How does ps turn the filter effect into a layer?

1 Open PS, select the layer to which you want to add the filter mask, and then click the right mouse button.

2 Click the Convert to Smart Object option.

3 Click the filter option in the toolbar.

4 Select the filter as needed.

The filter will be added to the smart image.

6 Click on the eyes in front of the filter mask to temporarily close them, and then reopen them as needed. I hope mine can help you.

How to filter the whole after ps completes the sky?

Mixed Synthesis of Picturesque Country Colors

1. Open two pieces of material, place the cloud material on the sky of rural material, and freely transform with Ctrl+T to adjust the size and position of the cloud.

Ctrl+T free conversion

2. After the position adjustment, we will find that some vacancies in the sky are not covered by cloud material. If we cover the whole cloud with deformation, it is easy to deform the whole cloud, so we use the selection tool to frame the local cloud on the left side of the heart-shaped cloud and cover the sky with local deformation.

Local deformation blocks the sky and the sun.

3. After the sky is completely covered, we need to create a layer mask on the clouds, use the brush tool, the foreground color is black, the softened edges are rounded corners, and the redundant places are erased and hidden.

Layer mask

At this point, we will find that the sky is a bit fake, because it is not consistent with the original sky color of the national material. Originally, the sky was light blue, but the cloud sky was a little too blue. At this time, we need to simply color the cloud sky. We choose Image-Adjust-Match Color from the menu bar.

Image-Adjust-Match Color

5. In the pop-up dialog box, our source is set as the background layer, and the layer below the source is selected as the layer 1, which is the cloud. Then reduce the color intensity, let the blue of the cloud sky slowly approach the blue of the national material sky, and finally click OK to complete the synthesis.

Reduce color intensity

6. We poke a layer with Ctrl+Shift+Alt+E, and then open the CameraRaw filter in the filter to carry out an overall color matching process. First of all, the main color of the original material is green, which gives us the feeling that the color is impure and dim, so we first adjust the overall color to green.

CameraRaw filter

7. Then we add a little exposure, contrast, black, clarity, defogging and natural saturation to it, and the specific values can be adjusted to the ideal state according to the preview box on the left.

Increase exposure, contrast, black, clarity, defogging and natural saturation.

8. Then we go back to HSL to adjust and adjust the road surface. The main color of the stone on the pavement is yellow, which is not bright enough, so we can adjust the yellow to make it transparent, or we can further adjust the overall green of the picture and add a little light green to make the overall picture more pure.

HSL adjustment

9. Finally, we need to adjust the overall tone curve, increase a dark tone of the picture, and reduce the shadow part, and adjust the tone curve to a small S curve to make the color of the picture have a sharp contrast.

Tone curve

10. After color matching, we can also click the Y symbol in the lower right corner of the preview box of CameraRaw filter to compare the original image with the effect image and observe the color matching effect.

Original and renderings

1 1. Picturesque rural composite color matching is completed.

translate

Note: every graphic tutorial will have related video tutorials, and some places are not very clear. You can refer to the video version to learn, and the effect is better!