Can the camera be used as a camera?

If the camera has a USB interface, it can be used as a camera. At present, the USB interfaces attached to many cameras have webcam functions. The following is how to use the webcam function of the USB interfaces attached to the cameras:

1. Usage of Sony cameras

1 , install the USB driver provided with the CD. (Newer models only have one USB driver, just install it. If it is a model with mobile USB function before 2003, the driver installed is different from the driver for transmitting still images, so you need to install them separately).

2. Connect the camera and turn on the camera (CAMERA) state.

3. Open the menu, enter the SETUP MENU menu (the second to last item in the main menu), and set "USB STREAM" to "ON".

4. Open the NetMeeting that comes with the system and click the play button () on NetMeeting. At this time, you can see the image captured by the camera. For an introduction to NetMeeting, just refer to the help file that comes with the software. The above introduction is very detailed.

Most of Sony’s models released in the past two years have webcam functions: such as Sony’s 2002 V16E, V18E, V25E, V27E, PC101E, V40E, V50E, V940E, V950E, V240E, V340E, V740E, Sony's 2003 V19E, V22E, V33E, V38E, V60E, V75E, V80E, V356E, PC330E and other models.

2. Usage of Panasonic cameras

1. Install the USB driver that comes with the CD.

2. Connect the camera and turn it on to record. At this time, "WEBCAM" will appear in the upper right corner of the LCD screen, indicating that the function has been activated.

3. Models such as MX500 need to be set up. Just press the button "WEBCAM" (this button is the same as the STOP button during playback).

4. Open the NetMeeting that comes with the system and click the play button on NetMeeting. At this time, you can see the image captured by the camera.

Panasonic models with webcam functions include: 2002 model DS50, MX500, 2003 model DS65, GS50, GS70 and other models.

3. Usage of JVC cameras

1. Install the USB driver provided with the CD (the installed driver is different from the driver for transmitting still images and must be installed separately) .

2. Connect the camera, turn on the camera, and switch the VIDEO switch to the MEMORY position.

3. Open the NetMeeting that comes with the system and click the play button on NetMeeting. At this time, you can see the image captured by the camera.

JVC models with webcam functions include: 2002 model DVL1170, DVX709, DVP7, DV3000, 2003 model DVP9, D70, DX35, DX95, DV900, DV4000, DV5000, DX300, D200, etc. model.