How to make billboards

Question 1: How to make billboards? Management expenses (sales expenses or operating expenses)-advertising expenses

Loans: cash on hand, bank deposits or prepayments, accounts payable.

Question 2: How to standardize the advertising production process? 1. Shooting preparation.

Shooting an advertising film is quite complicated and requires the cooperation of all professionals. Therefore, preparation before shooting is particularly important. The preparation before shooting often affects the shooting effect.

1) Personnel composition of film and television advertising production: According to the actual situation of China's advertising industry, advertising producers generally include: advertising creative director, advertising producer, film and television advertising director, photographer, lighting engineer, artist, composer, music, sound editing, model, actor, makeup artist and voice actor.

2) Pre-shooting preparation meeting: At the production preparation meeting, the production company reports all the details of advertising film shooting to customers and advertising companies, and explains the reasons. Usually, the production company will submit all the details such as production script, director's explanation, lighting tone, music sample, set plan, actor audition, actor modeling, props, costumes and so on. For customers and advertising companies to choose one by one and finally confirm, which will be the basis for subsequent shooting. If some parts cannot be confirmed at this meeting, we will arrange another time to discuss shooting until it is finalized.

3) Final preparation before shooting: Before entering the official shooting, the production staff of the production company make final confirmation and inspection on all the details determined at the final production preparation meeting to prevent any details from happening at the shooting site and ensure that the shooting of the advertising film goes smoothly as planned. Special attention should be paid to the venue, scenery, actors and special shots. In addition, before the official shooting, the production company will inform all parties including customers, advertising companies and relevant personnel of the film crew in writing about the shooting location, time, film crew and contact information.

Second, shoot

According to the resolution of the final production preparation meeting, the shooting work is carried out by the film crew at the arranged time and place according to the shooting script. In order to be responsible for customers and creativity, in addition to the film crew, producers of production companies usually contact customers, customer representatives of advertising companies and related creative personnel to participate in filming.

According to experience and work habits, in order to improve work efficiency and ensure performance quality, sometimes the shooting sequence of shots is not in accordance with the shooting script, but shots with the same position and similar depth of field are shot together. In addition, children, animals and other difficult shots are usually taken first, and still life, close-up and product shots are usually arranged at the end. In order to ensure that enough shots are shot for editing, each shot will be shot more than once, and the director may shoot more shots that are not in the script.

Third, post-production.

Post-production procedures are generally: film punching, gluing, editing, digital production, composition (or song selection), dubbing and synthesis. Of course, there is no process of film development and magnetic adhesion in the video tape.

Film processing: just like the development after taking pictures, the film used for shooting needs to be developed in a special development factory.

Colloidal magnetism: the developed film must be processed by this technology before it can be converted from the optical signal of the film to the magnetic signal for TV production, and then input into the computer to enter the editing program. In the process of magnetic transformation, the color and tone of the shooting material are generally processed.

Editing: Nowadays, editing work is generally done in the computer, so the shooting material must be input into the computer before the director and editor can start editing. In the editing stage, the director will splice the shooting materials in the order of the script and edit them into a version without visual effects, dubbing and music. Then combine the work of the stunt part into the commercial. This is the end of the picture part of the advertisement.

Digital production: Using workstations to produce some 2D and 3D special effects can reach a superb level, which plays a key role in enhancing the overall effect of advertisements.

Compose or choose music: The music of commercial movies can be composed or selected. The difference between the two is that if you compose music, commercial films will have unique music, which can be perfectly combined with the picture, but it will be more expensive; If you choose a song, it will be more economical in terms of cost, but other commercials may also use this music.

Dubbing synthesis: the voice editor adjusts the dubbing of the dubbing actor and the volume of the background music to a proper position, and synthesizes it with the picture in IN ... >; & gt

Question 3: How to do advertising, how to do it, and detailed steps. Xxx is only 299, that's right. Call now to order and return xxx. What are you waiting for? Call to order now.

Question 4: How to make led rolling billboards There are ready-made tiger modules.

If you know about single chip microcomputer, you can write your own program.

If not, there is a ready-made control system on the market now.

Question 5: How to make aluminum-plastic billboards? 1, over-peeling degree

Aluminum-plastic composite board adopts new technology, which improves the peeling strength of the most key technical index of aluminum-plastic composite board to an excellent state, and correspondingly improves the flatness and weatherability of aluminum-plastic composite board.

2. Super weatherability

KYNAR-500-based PVDF fluorocarbon paint has unique advantages in weatherability, and its beautiful appearance will not be damaged in hot sun or cold snow, and it will not fade for 20 years.

3. Excellent fire resistance.

Aluminum-plastic composite board, with flame retardant PE plastic core material in the middle and extremely difficult-to-burn aluminum layers on both sides. Therefore, it is a safe fireproof material, which meets the fire resistance requirements of building codes.

4. Impact resistance

Strong impact resistance, high toughness, no damage to top coat when bending, strong impact resistance, and will not be damaged by wind and sand in areas with heavy wind and sand.

5. The coating is uniform and colorful.

After chemical treatment and the application of Henkel film technology, the adhesion between paint and aluminum-plastic plate is uniform and the colors are diverse, giving you more choices and showing your personality.

6, the material is easy to process

The weight of aluminum-plastic composite board is only about 3.5-5.5 kilograms per square meter, so it can reduce the harm caused by earthquake disasters and is easy to carry. Its superior construction can complete cutting, cutting, trimming, bending into circular arc and right angle with simple woodworking tools, and can cooperate with designers to make various changes. The installation is simple and convenient, and the construction cost is quickly reduced.

7, easy to maintain

The pollution resistance of aluminum-plastic composite board is obviously improved. China's cities are seriously polluted and need to be maintained and cleaned after several years of use. Because of its good self-cleaning, only neutral cleaning agent and clean water are needed, and the cleaned plate will always be as good as new.

Standard size: unit: mm, length x width x thickness:1220x2440x4mm; ; 1220X2440X3mm Maximum size specification: 1600mmX6000mm.

Surface coating: fluorocarbon resin (PVDF), polyester resin (PET) and other marble-like and wood-like surface layers.

Core materials: flame retardant core materials, high-pressure low-density polyethylene (PE), etc.

① Series of aluminum-plastic composite panels for exterior walls: aluminum thickness has five specifications: 0.30mm, 0.35mm, 0.40mm, 0.45mm and 0.50mm; ; The coating consists of fluorocarbon resin (PVDF) and polyester resin (PET).

② Aluminum-plastic composite panel series for interior wall: aluminum thickness has five specifications: 0.30mm, 0.2 1mm, 0. 18mm, 0. 15mm, 0. 12mm; ; The coating is made of a polyester resin (PET).

Chang fireproof aluminum-plastic composite board series: aluminum thickness has six specifications: 0.25mm, 0.30mm, 0.35mm, 0.40mm, 0.45mm and 0.50mm; ; The coating is a fluorocarbon resin (PVDF). The plate thickness can reach 3 mm ~ 6 mm;

Special color

According to customers' different requirements for colors, different colors can be blended.

application area

1. Building external wall curtain wall panel

2. Renovation and renovation of external walls of old buildings.

3. Balcony, equipment unit and indoor compartment

4, billboards, signs, advertising signs

nonstandard size

Can be customized according to customer requirements, and the size can be negotiated in advance.

Question 6: How to make billboards with color steel buckles? What materials do you need to make billboards?

The materials for making color steel billboards are [square tube frame]+[color steel gusset plate]+[gusset plate keel]+[acrylic/tin font]

Billboard production steps

Square pipe rack

According to the size of the billboard to be made, the materials are cut and welded into a shelf, and the reinforcing ribs are welded on the shelf according to the horizontal or vertical installation of the gusset plate. (Note that it is best to weld a reinforcing rib every meter, determine the size before welding, and use a ruler to pull the diagonal size after welding to confirm the founder. )

Fixed keel

Fix the keel on the square pipe rack with self-tapping nails.

Buckle the pinch plate

During formal installation, after welding the square pipe underground, buckle the gusset plate, then paste the acrylic word, and then hang it and fix it on the wall.

Put up advertising words.

After all gusset plates are installed, you can paste luminous characters or tin characters on the gusset plates. Then the billboard is finished.

Question 7: How to make aluminum-plastic billboards? The installation process of aluminum-plastic billboards is setting out → fixing the connectors of the skeleton → fixing the skeleton → installing aluminum plates → closing the structure → installing advertising words → testing 1. Installation notes 1. The variety, quality, color, pattern and line of aluminum plate should meet the design requirements, and should have the product certificate. 2. If the light steel keel is used as the advertising signboard frame, its specification and shape should meet the design requirements, and rust removal and rust prevention treatment should be carried out. 3, aluminum plate installation, design requirements, appropriate uses core-pulling aluminum rivets, rubber ring must be padded in the middle. The spacing of core-pulling rivets should be controlled at100-150 mm. (a) pay-off fixed skeleton, skeleton position at the grassroots level. The skeleton is fixed on the main structure. Check the quality of the main structure before setting out. (2) Weld the connector for fixing the skeleton on the column of the main structure to fix the skeleton. And (3) fixing the skeleton for anticorrosion pretreatment. Install the skeleton accurately and firmly. Check the center line and surface elevation after installation. In order to ensure the installation accuracy of the plate, theodolite should be used to penetrate the vertical frame members of the beam. Properly handle deformation joints, settlement joints, variable cross sections, etc. , to meet the use requirements. (4) Installation of aluminum plate The installation and fixation of aluminum plate should be firm, reliable, simple and easy. 1. Gaps between plates shall be internally treated to make them smooth. 2. After the aluminum plate is installed, cover it with plastic film or other materials to protect the easily contaminated parts.

Question 8: What are the methods of store billboards, such as spraying plastic LED with neon lights or sticking your logo on it with light steel keel to see what you want to use? It is popular to use plastic to emit light now. Generally, atmospheric luminous characters are made of aluminum-plastic plates. Plastic is more expensive to shine, but it is cheaper to paint with grades, but the overall feeling is low. LDE (light-emitting diode) can be hung on the signboard as a small signboard at night, which is brighter and more eye-catching.

Question 9: I want to know the detailed method of making electronic billboards with led. I tried, and it was very troublesome. I can't do it without enough patience.