Is the camera power indicator not on? These reasons may have caused the problem.

If the camera power indicator light is not lit, it may be caused by the following situations. This article will introduce these reasons in detail for you and provide solutions.

Reverse connection of power supply

The positive and negative poles of the power supply may be reversed, which is a common cause of the problem. Please make sure that the power supply is connected correctly.

Electric power problem

The power supply may fail, which is also a common cause of the problem. Just change the power supply

Power cord problem

A problem with the power cord may also cause the camera power indicator to go out. Especially for the power line of 12V2A, if the copper content is low or the wiring distance is too far, the voltage attenuation may lead to insufficient power supply.

solution

First, check whether the power connector is connected backwards. If so, reconnect it correctly. If it is a power failure, just replace the power supply. If there is a problem with the power cord of 12V2A, do not try to connect the power cord. If the distance is not enough, I'd rather choose 20V power cord than 12V. Most problems can be solved by reconnecting the power connector and replacing the power supply or camera.

Contact a professional engineer

If the above methods fail to solve the problem, it is recommended to contact a professional security monitoring engineer for on-site investigation and maintenance.