Construction technology of wallpaper for lighthouse floor paint decoration house

Generally, putty is scraped twice on the wall, which can not only level, but also cover the background color.

After the putty is dried, use sandpaper to polish it and clean it to ensure that the wall is smooth and clean.

Step 2: Brush the moisture-proof basement membrane.

This moisture-proof basement membrane is very important. It is a professional alkali-resistant, moisture-proof and mildew-proof wall treatment material, which can effectively prevent moisture and alkaline substances from seeping out of the construction base surface, thus causing damage to wallpaper.

It does not contain formaldehyde and is harmless to human body. The elastic molecular material can also protect the wall when micro-cracks appear in the wall.

In the process of painting, it should be thin and uniform to reduce the phenomenon of paper gluing caused by unevenness.

Step three, draw a vertical line on the wall.

After the moisture-proof film at the grass-roots level is completely dried, draw a vertical line.

The position of the starting line should start from the internal corner of the wall and be less than 1~2cm of the wallpaper.

Measure the whole vertical datum line with a centering hammer, and then draw a vertical line along the corresponding wall with a marker.

Fourth, brush the glue.

Mix the glue before painting, and mix the glue according to the specified proportion according to the product description. It should be noted that it must rotate in one direction in the barrel and cannot be mixed in the opposite direction.

After mixing, evenly brush the adhesive on the wallpaper wall. When painting the wall, it should not be too wide according to the width of the wallpaper.

Fifth, put up wallpaper.

According to the vertical line drawn in advance, paste the first wallpaper from the inner corner of the wall.

Be sure to keep the wallpaper vertical! Be sure to stay vertical! Be sure to stay vertical! Say the important things three times! Moreover, in the same room, you can't put wallpaper in two places at the same time, so as to avoid the uncoordinated patterns.

When pasting wallpaper, you can roll it back first, so that you can paste it from top to bottom.

Sixth, deal with the details.

Sticking wallpaper will inevitably encounter other obstacles such as sockets. At this time, it needs to be handled carefully, otherwise all previous efforts will be in vain and there will be no beauty at all.

Draw a fork at the switch with a utility knife, scrape off the periphery of the socket with a scraper, and then cut along the periphery of the socket with a knife to remove the redundant part.

The upper and lower redundant wallpaper is also carefully cut off with a utility knife.

Seventh, clean up.

Glue and stains on the surface of wallpaper should be wiped clean.

Check the flat-fell seam carefully, and there should be no "mouth opening" phenomenon of warping corners and edges, so as to avoid being unable to handle it after completion.