Wedding photo poster frame-how to install wedding photo poster frame, wedding photo welcome poster

How to assemble wedding poster frame tools: X-frame, wedding poster.

1. Take out the bracket that needs to be installed on the bag.

2. Remove the bracket, spread the bottom two feet and put them on the ground.

3. Insert the other two poles into the holes in the four corners of the wedding poster.

Then, take out the wedding poster as a display box at this time.

5. From top to bottom, the four corners of the picture are fixed on the small hooks on each leg of the bracket in turn.

6. Then, after plugging it in, adjust it to the appropriate position as required, and then straighten the X bracket to complete the operation.

Installation is complete. How to install the poster frame? The installation method is mainly divided into the following steps:

1. Rotate the bottom of the poster frame about 90 degrees and place it down.

2. Remove the sticky paper from the guide rail of the painting axis of the poster frame, align the pasted picture, and align the two ends to make it flat.

3. Open the plastic cover at one end of the picture hanging strip, take out the hard plastic core strip in the middle (stick the hard plastic core strip on the upper edge of the back of the picture with a one-centimeter-wide double-sided tape), fold it and put it back in the metal tube, and cover it with the plastic cover.

4. Hold down one end of the bottom, pull the picture hanging bar by hand, pull out the ring bolt on the end face of X frame, and slowly put the picture into X frame (note: pull the picture hanging bar and picture first, and then pull out the bolt).

5. When in use, take out the three-fold metal rod placed on the X frame and connect it. Insert one end of the metal rod into the triangular plastic mouth of the X frame, then slowly pull out the picture, and hook the hook of the picture hanging strip on the top of the metal connecting rod.

How to assemble the wedding poster bracket 1 How to assemble the wedding poster bracket?

1. Take out the booth to be installed from the bag.

2. Take out the bracket, spread your legs at the bottom and put them on the ground.

3. Insert the other two feet into the hole.

4. Take out the display frame.

5. Fix the four corners of the picture on the small hooks on each leg of the bracket from top to bottom.

5. Straighten the X bracket.

Installation is complete.

2. How to make a poster stand

Water-filled poster frame is filled with water or sand in plastic base, and outdoor poster frame with iron base is installed with iron base to support the poster frame stably. I recommend one for you: Name: water injection poster frame OPS0 1 Model: OPS0 1 Size: 594*84 1mm Material: aluminum alloy+plastic kettle Qty: 2 boxes/set. Established in 2002, Guangzhou Bai Sheng Exhibition Equipment Co., Ltd. is a professional research and development, manufacturing and sales company. Advertising: shopping mall promotion activities, press conferences, large-scale public relations activities, large-scale celebrations, brand promotion and other activities. Exhibition category: exhibition background, exhibition reception desk, exhibition layout, various exhibitors at home and abroad, participation abroad, etc. Trade and export category: high-quality and professional manufacturers bring considerable profits to you and your customers. Bai Shengzhan is very famous in Guangdong, with good product quality and good reputation.

I believe many people are very happy when taking wedding photos, and the shooting process is not complicated. Most people will still go to the photo studio to take photos, but in fact, if they have equipment, they can also take photos directly at home. After the wedding photos are taken, some people still don't quite understand how to combine the wedding brackets. For details, please refer to how to install wedding photo poster bracket and wedding photo welcome poster picture.

The assembly method of gauze poster bracket is as follows: firstly, rotate the bottom of the poster bracket 90 degrees and put it down, then directly tear off the sticky paper on the drawing axis guide rail of the poster bracket, align and level the finished pictures, then open the plastic cover at one end of the painting rod, pull out the plastic core rod inside and put it back on the metal tube cover, finally press the bottom, pull the picture bar by hand, pull out the plug outside the end of the display bracket, and collect the pictures into the progress bracket.

In fact, many couples don't know much about marriage. When they are considering putting welcome photos, most of them choose to use playful photos as welcome photos, which makes the scene full of active seven points and also wants guests to feel happy. However, it should be noted that when choosing, you can choose a slightly good-looking photo, don't spoof wedding photos, and don't use black and white tones.

When placing the welcome photo, you can put it directly in the entrance lobby of the hotel, so that guests can see it at a glance. The photos are mainly festive, then marked with the names of the bride and groom, and then the posters are filled with greetings, or simply write a love story of two people or something memorable. Finally, after the wedding, you don't have to throw away the welcome photo, you can save it as a souvenir, which is also a good memory.