Traditional Culture Encyclopedia - Photography and portraiture - How to shoot double exposure?

How to shoot double exposure?

Question 1: How does Nikon D7 100 take double exposure photos? There is double exposure in the settings. When it is turned on, an overlapping box icon will appear on the shoulder screen, and you can shoot at this time. Example: Take photos of the same person as the hitter and the victim.

1: You must use a tripod, and the camera must not shake before the two photos are combined (without a tripod, the scene will change after the two photos are combined, and even the slightest ghost will appear). Cable release or exposure delay is also best used.

2: Turn on double exposure

3: Use a black non-reflective blackboard to block half of the lens exposure (if you can't focus, press the shutter half first to block the exposure).

4: Block the other half with 3. Repeat 3. There is no need to set it in between.

5: Automatic photo synthesis or manual photo synthesis.

Note: If the fitting point (covered median line) is not well grasped, there will be the following points:

1: The image cannot be synthesized automatically (there is no connection in the middle), but it can be synthesized manually, but there are black bars in the middle.

2. The exposure of the left and right half photos after synthesis is different (the file difference is too big).

3. The intermediate synthesis part will be defective.

Question 2: What software can I use to take photos with my mobile phone? It can be made with Pixlr double exposure.

draw

affect

It can also be made by melting double exposure.

Question 3: How does Canon 60D take double exposure photos? I really want to shoot a set of double exposures, but I don't know how to shoot them. Please consult a master. A camera like 60D can also be double-exposed, but it needs manual operation.

First, the shutter should be set to be long, such as 15 seconds, or even door B.

Second, it is best to shoot in a dark environment.

The steps are as follows: set the shutter speed, press the shutter after focusing, quickly cover the lens with black cardboard after taking the first picture, remember to cover it tightly to avoid light transmission, then the second subject enters the shooting range, take off the black cardboard for the second exposure, and then close the shutter.

If it is in a dark environment, set the shutter speed, press the shutter after focusing, then light the first subject with a flash or other light source, then remove the light source, light the second or even the third or fourth subject, and then close the shutter, thus realizing multiple exposure.

The principle of light painting is the same, LZ can practice more.

Question 4: How do SLR cameras take double exposures? Turn on the double exposure function and start shooting.

You can shoot a movie directly, so that after the movie is released, the pictures of the two photos will overlap.

You can also use black cardboard to block a part of the lens, take one picture first, then cover the other part and take another picture, so that the exposure effect is better after the film is released, and the confusion of overlapping pictures can be avoided.

Note that it is best to use a tripod to shoot films with multiple exposures. Otherwise, the machine will shake and the background will be chaotic.

Question 5: How to take double exposure photography? First, double exposure refers to repeated exposure twice when shooting, so that the images overlap on the same frame of film or the same digital recording file.

Second, double exposure is divided into film double exposure and digital photography double exposure.

Third, the double exposure of film.

1. Turn on the camera multiple exposure switch/key and set it to double exposure appropriately;

2. Make multiple exposures with lens cover and other equipment, and make the first exposure;

3. Under the condition of no exposure, complete the power-on (electric shutter) or mechanical winding (mechanical shutter) of the shutter, adjust and complete the focusing and parameter setting of the second object, and then carry out the second exposure.

Fourth, double exposure of constant code photos

1. Open double exposure in the menu, and set the related parameters of multiple exposure, with the exposure times set to 2, continuous shooting times and so on.

2. Aim at the first exposure object and make the first correct exposure;

3. Aim at the second exposure object and make the second exposure correctly.

Five, the principle of double exposure and matters needing attention

The concept of secondary exposure is image overlap, and the principle of secondary exposure is "the first exposure image is the clearest, and then it becomes thinner and thinner."

Double exposure under normal light conditions is mainly to grasp the picture arrangement, and to have a favorable picture combination instead of harmful picture overlap. Double exposure under special conditions, such as night scene, requires a tripod to fix the camera and lock the focus. Generally, the elements of point, line and surface are highly coincident, and the combination of light and shadow effects is pursued. When setting exposure parameters, it is best to use an exposure meter to measure the values.

Question 6: How does Nikon D7000 shoot double exposure? I don't know what you mean by multiple exposures. If there is, you can set it in the shooting menu-multiple exposures in the design!

Question 7: How was the double exposure shooting? Thank you for your attention and support! View original post >>

Question 8: How to get the effect of double exposure with only one camera depends on what camera it is. A camera with multiple exposure function, that is, a multiple exposure camera, should be exposed one by one on the same film, and it is impossible to have multiple exposures at a time.

Question 9: How to shoot with double exposure? Double exposure, also known as double exposure. The film has been exposed again. Because there is no double exposure preventer for large cameras, it is easy to fail because of double exposure shooting. Small and medium cameras are equipped with devices to prevent double exposure. Without film, the shutter cannot be opened again. There is no camera to prevent double exposure, and double or multiple exposures can be made consciously. First of all, after the first contact, when the rewind crank stops rotating clockwise, the film is tensioned, and then the fast rewind button (multiple exposure button) is pressed until the rewind knob does not move and the film is wound. When the film does not move forward and the shutter speed is good, press the shutter and double exposure is planned for multiple exposure. Repeat the operation and multiple exposures according to the above steps. After many exposures, the best lens cover, empty frame to shoot movies. Sometimes the image may move slightly.