How to choose the ceiling lamp in the conference room?

Generally, there are three-color meeting room lights and LED meeting room lights.

Scope of application: This series of lamps is suitable for all kinds of large, medium and small conference rooms, video conference rooms, recording and broadcasting classrooms, lecture halls, distance education recording and broadcasting rooms, training classrooms, headlamps for podium leaders, audience headlamps, multi-function halls, high-level clubs and other places that need lighting. It is the first choice for office transformation into a studio.

Three-color meeting room lights, also known as embedded three-color soft light lights, are professional three-color lights, which are very different from ordinary civil lights. The shooting of color temperature, color rendering index and illumination all need professional tricolor meeting room lights.

There are three color temperatures used in professional photography: 3200K, 4000K and 5600K K.

There are three kinds of color temperatures used in civil office and commercial fields: 2700K, 4300K and 6500K K.

LED meeting room lamp replaces the traditional three-color electroluminescence, adopts advanced design and processing technology, and its appearance is customized with high-strength aluminum profiles, with modern and fashionable line design, making its appearance neat and bright. Equipped with LED display screen to control DMX coding and lamp body function selection, built-in anti-interference circuit, its structure is perfect and compact, and built-in electronic bulb brightness can be adjusted at any time. Suitable for meeting rooms, academic lecture halls, audio-visual classrooms and other occasions that need professional shooting.

It is composed of 15 12 LED beads, with high luminous efficiency, large area luminous matrix, high color rendering index and good color reproduction. Equipped with high-transparency acrylic soft light board, the light output is soft and uniform, without harmful infrared rays, ultraviolet rays, glare, flicker and glare. Natural heat dissipation, environmental protection and energy saving, service life of up to 50,000 hours, low operating cost, energy saving of 50% compared with traditional tricolor electroluminescence, wire saving and other advantages.

Lighting is the basic requirement of the conference room. The meeting room does not use natural light, and the light source should be "three-color lamps" (R, G, B) with a color temperature of 3200 K. For the three-color soft light lamps, a dimmer should be used for dimming control. Conference lighting is designed for camera shooting, photography, image acquisition and transmission. If ordinary lighting is used, the image will be white, unnatural and unclear after image acquisition.

In addition, the use of 3200K "three-color lights" (R, G, B) cold light source has another advantage, that is, participants will not feel uncomfortable feelings such as glare and burning for a long time. Illumination of photography area: the average illumination of the chairman area should not be less than 800lx, and the average illumination of the general area should not be less than 500lx. Illumination around the display or large screen rear projection: 50LUX~80LUX, otherwise the viewing effect will be affected.

Tricolor soft light lamp with hood

Click here to view all news photos.

Instructions for use of three-color soft light for film and television

1. Before use, please check whether there is any damage caused by transportation or loose fastening screws.

2. Tricolor soft light lamp for film and television uses 220V/36W tricolor lamp as light source.

3. When installing the lamp tube, first insert one end of the glass tube into the protective bayonet and insert the lamp holder into the lamp holder. Don't touch the glass part of the lamp directly with your hands.

If the lamp tube is damaged, it should be replaced.

5. Adjust the light shield to achieve the best light effect.

6. Please install the lamps in a ventilated environment below 45℃ and ensure that the environment is dry.

7. Please confirm that the maintenance cover must be locked when using.

8, lamps and lanterns must have a good grounding, comply with safety regulations.

9. Please don't shake the light when it is on.