How does Nikon d7000 adjust the focus mode?

1. Select autofocus. There is a button under the model label of the machine, as shown in the figure below. You can choose auto focus or manual focus by dialing it. AF is autofocus and m is manual focus. After selecting autofocus, select AF-C mode. AF-C is a full-time servo af for shooting moving objects.

2. How does Nikon D7000 set autofocus? At the same time, turn the switch on the lower right corner of the front of the camera and the switch on the lens to AF. To set the focus type, press the AF key on the fuselage and turn the wheel on the back (hand-facing side) to set the AF mode.

3. Press the af button and dial the front wheel and the rear wheel at the same time. The front wheel selects the number of focus points, and the rear wheel selects the focus mode.

4. Lead: How to set the focus mode of Nikon d7000? Now let me tell you. Press and hold the AF mode button and rotate the auxiliary command dial (front wheel) until the required setting is displayed on the viewfinder or control panel. See page 95 of Nikon D7000 manual for details.

5. Turn on the camera and press the info key. Find the autofocus button on the back of the SLR and press the black button in the middle. At this time, "AF area mode" is displayed on the display screen. Take D750 as an example, adjust the dial before rotating. Turn the dial to adjust to the cross focus. Turn the dial to adjust to single focus.

6. If you want to set the focus type, press the AF key on the fuselage and turn the wheel on the back (hand-facing side) to set three modes of AF mode: A full automatic focus mode, S single servo automatic focus mode and C full servo automatic focus mode (continuous focus).