Traditional Culture Encyclopedia - Photography and portraiture - What focusing mode does af camera use to shoot the 100-meter sprint?
What focusing mode does af camera use to shoot the 100-meter sprint?
1, single-shot AF This is a common setting when the distance between you and the subject is fixed.
2. Aim the camera, and then its autofocus sensor illuminates the object.
3. Press the shutter button gently to activate autofocus.
4. After determining the focal length, the camera sends a signal in the viewfinder to stop focusing.
5. As long as the button is half pressed, the focal length will be locked at the current position.
6. Now you can take pictures (even if the AF sensor is no longer facing the subject), and then press the shutter button completely to take pictures.
7. Usually, if the camera doesn't get the right focus, it is impossible to shoot.
8. This is called focal length priority.
9, 2, continuous autofocus This is usually used in sports or action photography when the subject is constantly moving (for photographers).
10, with the AF sensor on the subject, press the shutter button halfway.
1 1. As long as the shutter button is half pressed, the camera will focus continuously.
12. When the button is fully pressed, the camera will take photos regardless of whether the image is in perfect focus, which is called release priority.
13. Continuous autofocus can keep fast-moving skateboarders focused. 3. Manual focusing (MF) In some cases, autofocus is not very good, such as the scene is too dark, the subject lacks a clear contrast area, shooting through a cage, or the subject moves too fast or irregularly.
14. In these cases, manual focusing may be more effective.
15. Switch to manual focusing (through camera body or lens) before manually adjusting the focus ring.
16. The lens using ultrasonic motor may be able to focus manually in AF mode, but the standard autofocus lens should only focus manually in MF mode, otherwise the AF motor will be damaged.
17, AF/MF switch on lens and camera body. The subject has been focusing until it clearly appears in the viewfinder.
18. The object may be anywhere in the picture, so it can be composed before focusing.
19. However, if the AF sensor focuses manually when it is on an object, the camera usually displays a confirmation signal when it reaches the clearest focus.
20. This feedback is useful when it is difficult to visually determine whether the focus is accurate.
2 1. Manual focusing is also useful when you want to get the maximum depth of field with a small aperture.
22. When using a wide-angle lens, set the focal length between the camera and the DOF area to be covered to 1/3.
23. For example, you want to make the scene from 5 to 5 to 5~50m meters clear.
24, the total depth of field is 45m.
25. Therefore, you should focus at about 15m in the scene or 20m away from the camera.
26. When using a telephoto lens, you should focus on half a DOF area.
27. These ratios are only approximate; You should use the DOF preview button on the camera (if any) to check whether the DOF really covers the required scope.
28. You can also view images on LCD instead of d of preview.
29, 4, multiple autofocus sensors Most DSLR have multiple autofocus sensors, and you can choose to use one or more of them at the same time.
30. If the subject is obvious and is the nearest object in the frame, especially when the subject is walking around, all AF sensors can be activated.
3 1. Combining multiple sensors can cover a wider range and focus faster.
32. If the subject is not obvious, or other objects in the viewfinder are closer, then only the central sensor should be used.
33. An autofocus point can be used without interference from other autofocus sensors, because other sensors may focus on other objects.
34. In addition, the central autofocus point is usually more sensitive, while others are less sensitive.
35. This method should be chosen in demanding situations, such as rapid exercise.
36,5,A-DEP mode This mode is available on some CAONDSLR.
37. It actually combines exposure and focus modes.
38.A-DEP means automatic depth of field, which uses all the AF sensors of the camera to detect the nearest and farthest points covered by these sensors.
39. Then, it chooses an aperture to provide enough depth of field to cover the range.
40. Finally, the camera sets the focal length so that the obtained DOF can cover the selected scene.
This article ends here.
- Previous article:What are the two Elena in the movie saying?
- Next article:Luomen wedding photography
- Related articles
- Amblyopia in the right eye, more than 700 degrees in the left eye. Can I learn photography? Who knows tell me, thank you!
- What color is mocha?
- How many sets of clothes can I choose for a wedding photo? What are the skills in choosing clothes?
- How about taking pictures with Xiaomi 12Pro? Introduction of Xiaomi 12Pro's camera function.
- What computer is used in the later stage of photography?
- What are the top ten photo editing software?
- What is the major of animation design?
- Where is the source of the left bank of Tianjin Zhonghai?
- What kind of digital camera is more durable?
- Movie talent enters ~ asks for recommendation ~ asks for details ~ ~ high score reward ~ ~