Traditional Culture Encyclopedia - Photography and portraiture - How to change the external screen of vivo

How to change the external screen of vivo

How to replace the external screen of vivo I suggest you go to the local after-sales service center to replace the original screen. You can go to the phone settings-more settings-after-sales service to inquire about the latest after-sales information, or you can go to the official website-service-service outlet of vivo.

Screen, also known as display screen, is an electrical appliance used to display images and colors. The screen size is calculated according to the diagonal of the screen, usually in inches. At present, the mainstream sizes are 17 ",19", 2 1 ",22", 24 "and 27", which refer to the diagonal length of the screen.

Commonly used display screens include standard screen (narrow screen) and wide screen, with the aspect ratio of standard screen being 4:3 (or a small ratio being 5:4), and the aspect ratio of wide screen being 16: 10 or 16:9. The screen is an integral part of the image package.

The inner layer is coated with fluorescent powder, which emits light when electrons hit the screen and can display waveforms or images. BSV LCD splicing technology adopts LED backlight to realize uniform color display.

How to change the external screen of iphone? If we want to change the screen, we must buy a screen first. Physical stores are too "pitted" for our DIY cluster. Since the physical store is not good, go to TB to buy it. The price is better than that of a physical store, you know.

2

Prepare the tools needed for disassembly, as shown in the figure below.

three

Remove the two screws at the bottom.

four

Push up the rear cover to remove it.

five

In order to verify whether the screen you just bought is in good condition, first remove the baffle on it. There are five screws in all.

six

Pry up the cable interface between the touch screen and LCD with tools, and gently fold back the original cable to avoid disturbing the test of the new screen.

seven

Because the newly bought screen is sealed with a sealed bag, only one line is left to test the quality of the screen. If the screen is torn before the test, even if there is something wrong with the screen, the seller doesn't want it. So test it first. Align the two cables with the two connectors on the motherboard, press firmly, and then turn on the computer.

eight

Method of testing the screen: 1. Make two pictures in your mobile phone in advance, one white and one black (I think everyone knows this, right? ..) and then retrieve two pictures from the album and browse them in full screen. Observe the bright spots and dark spots on the screen. If you don't go to the next step. 2. Hold down the icon on the screen and shake it, that is, move the icon ~ ~, and then move an icon around the screen. If the icon doesn't appear, it suddenly doesn't follow the finger movement or has an offset, then ok.

nine

Remove the battery cable screw and gently pry it up with a tool.

10

If it is the first time to disassemble the machine, the double-sided tape under the battery will stick firmly. Please don't use battery plastic paper to pull directly. It is recommended to pry it gently from left to right with a crowbar before taking out the battery.

Note: there is a small cushion under the excuse of battery cord. Don't lose it.

Remove the set screw of the speaker cable. Note: small left and big right.

Take out the SIM card slot.

Gently pry up the speaker cable connector with a tool.

Gently pull up the speaker cable. Note: The bottom is pasted with double-sided tape. Don't push too hard. If it is broken, it will become dumb and smaller by 4. Be sure to remember.

Remove the bottom of the speaker and microphone. There are two screws and a socket. (Note: Please pay attention when unplugging the socket. When the defense line was broken, I gently pried it up with a small screwdriver. ) After unscrewing the screws, gently remove the speaker from the right side by hand.

Pry up the three wire interfaces (I don't know which ones these three interfaces belong to) next to the camera and the screen wire one by one, then remove the two screws of the vibrator in the upper right corner, the left side is long and the right side is short, and then there is a special screw on the left side of the vibrator, which needs to be removed with a slightly larger flat screwdriver. There is also a screw and a white spot hidden under the battery paper, which is waterproof test paper. You can see it by picking it with a needle. The screw was also removed. Examination papers, etc. Then put it on.

From then on, the motherboard can be gently lifted and removed along the arrow direction.

Because you just change the screen, you don't need to remove the camera and receiver. Then we can remove the screws of the frame. A total of 6 large screws (note: all 6 large screws have washers, remember not to lose them) and 4 small screws.

After removing the screw, pry it off at any position with a tool.

Since then, the bad screen has been removed, and the new screen can be pressed ~ ~ in reverse order. Installation succeeded! All tests are normal, the microphone sound is clear, the speaker, vibrator, flash, camera and gravity sensing are normal.

How to change the external screen of iphone requires professional tools, and it is not recommended to change it yourself. Outside the mobile phone repair place, replace the external screen of an iphone7 around 220 yuan (the price is for reference).

Can the external screen of vivo xplay6 be replaced? Vivo Xplay6 uses an integrated screen. If it is necessary to replace the screen as a whole, the screen price of this model is 1 160 yuan. It is recommended that you go to the local after-sales service center to replace the original screen, to the phone settings-more settings-after-sales service to inquire about the latest after-sales information, or to the service outlets of vivo in official website.

What should I do if the external screen of Vivo x9 plus needs to be replaced? Vivo X9plus mobile phone is an integrated screen. If it needs to be replaced, the x9plus mobile phone display is recommended to go to vivo after-sales service center for testing and replacement. To inquire about the price of accessories, you can go to vivo official website-Service-Self-Service-Accessories Inquiry-Search for mobile phone models and accessories, and the after-sales address can be found in vivo official website-Service-Service outlets-Search for the provinces and cities.

Details are as follows:

1. Configuration, the biggest feature of vivo x9plus is that it is equipped with two 20-megapixel and 8-megapixel front cameras, supplemented by soft light. The 20-megapixel sensor is IMX376, 1/2.8 inches, aperture F2.0, and a 5P lens jointly developed with Sony, which supports dual-camera blur and motion.

2.vivo x9plus rear camera16 million pixels, 1/2.8 inches, aperture F2.0, covered with sapphire glass, supports PDAF phase focusing, slow motion, HDR, panoramic mode, night view mode, ultra-clear image quality, document correction, motion stability, professional photography, time-lapse photography and beauty.

3.vivo x9plus is also equipped with a 5.5-inch/kloc-0 1080pSuperAMOLED screen, Snapdragon 625MSM89532.0GHz eight nuclear processor, 4GB memory, 64GB non-expandable package storage, 3050mAh battery, dual-band Wi-Fi 802.1ac/Bluetooth 4.2.

How to replace the external screen of the ipadmini2 First of all, we must understand that the touch screen of the ipad mini2 must buy a touch IC, which can be directly installed and used, and does not need to be soldered by itself. First, we need to prepare the following tools. Ipad screen is relatively large, and it is generally not easy to make it into that kind of rolling. We can pry it directly from both sides of the screen. There is no risk in using a knife. The first choice is a knife, simple and rude. Align the blade with the gap between the screen and the frame, and then remove the blade. Don't insert the knife, put it on the scratched LCD screen, push the knife slightly in the opposite direction of the blade and draw a seam. Please note that there is a flat cable in the red circle. Pay attention when prying the screen. Better get it here in the end.

Remove the triangular pry block. If the screen is slightly damaged, several crowbars can easily remove the screen. If the screen is badly damaged, you can only scrape off the border with a knife. In this case, you must be patient and clean up bit by bit, so as not to hurt the screen.

After prying open the outer screen, you can flip it at 180, and then carefully clean the broken glass and double-sided tape on the LCD screen and the frame. There are four screws in the red circle. Unscrew them. There are stickers on the two screws at the top of the picture, so you can tighten them when you insert them.

After unscrewing the screws, turn on the LCD screen. Be careful not to damage the LCD cable. There are several screws in the red circle inside the frame. Unscrew them.

Remove the metal shield first, and then unscrew the screw on the shield in the red circle.

Unplug the screen cable and remove the damaged touch screen.

Then put the new touch screen in a proper position and install the cable of the screen. Then install the cable shielding plate, large shielding plate and LCD screen in turn, and walk in the removed order.

Finally, remove the protective layer of the double-sided adhesive tape on the back of the touch screen.

How to Replace Flat Panel Monitor How to Replace Flat Panel Monitor:

1, some basic tools, gloves, screwdriver.

2, some other tools, pry, tube (for screws), tweezers (small things such as clamping screws).

There is also blowing air to clean the small dust on the screen.

3. Put on gloves, install the corresponding small screw heads, start to remove the two screws at the periphery, and then carefully pry the back cover along the periphery with a crowbar. In fact, many people on the Internet directly removed the front panel without moving the back, which reduced the workload. However, if the inner screen is not removed during replacement, the outer screen is inconvenient to take and it is easy to damage the inner screen.

4. Unscrew all the small screws on the motherboard and the screws on the plastic bracket, about 6 or 7, and then slightly remove the plastic bracket bayonet. Dismantle the main board, plastic fixing frame and inner screen directly, because only the outer screen is changed, so the battery, main board and inner screen are not disassembled separately, which reduces the workload and tries to avoid damage caused by too much disassembly by non-professionals.

5. The front panel consisting of the outer button frame and the cracked outer screen (capacitive touch screen) is now glued together with black double-sided tape. Then take out the hair dryer, adjust it to high temperature, start blowing along the periphery of the outer net to soften its sticky vinyl, and then pry off the outer net from the frame.

6. When removing the back cover, open the contact pressure groove and take out the cable. Open the bought external screen and find that there is black double-sided tape around it. Just tear off the film on the double-sided tape and press it directly on the frame. Press hard around. Heat. Keep pushing.

How to replace the external screen of HTC mytouch 3G is troublesome. Be careful with the cables inside, or ask a professional to operate them. If you want, you can find the disassembly video online.

How to replace the mobile phone when Huawei's p9 external screen is broken? I suggest you go to Huawei Customer Service Center for inspection and maintenance. The address information query method of Huawei Customer Service Center is as follows:

1. You can find the nearest service center through the "Services" page in the member service APP that comes with your mobile phone.

2. There can also be an after-sales outlet inquiry address entrance at the bottom of the official website page of Huawei Mall;

3. Pay attention to the official account of "Huawei Terminal Customer Service" on WeChat, and click on the service center in self-service to inquire.

Tips: It is recommended to back up the mobile phone data before going to the after-sales outlets, and you can communicate with the outlets in advance to confirm the business hours.

How to replace the first Sharp 6228c external screen: Menu-Settings-Display Settings-External Screen Display Settings.

The second type: press the second keyboard key in the bottom row, and it will be displayed on the external screen.

I hope it helps you ~~O(∩_∩)O~~