Traditional Culture Encyclopedia - Photography and portraiture - How to use Canon Flash?

How to use Canon Flash?

Tools/raw materials

Canon 600 flash

Methods/steps

1/6

First, let's look at the control panel. The buttons on the panel are four function buttons in the top row, which are used to select the adjustment content in different modes. Below is the anchor wheel and the mode switch button.

2/6

Canon 600 has five modes: automatic flash, manual flash, frequency flash and automatic/manual flash test. You can use the mode button to switch. Use the switch button to switch the main light or the auxiliary light, and control different groups of lights.

Canon 600 can set multiple lamp groups in groups. In operation, the left wireless button can be used to switch the main light or the auxiliary light, and the four function buttons can be used to adjust the function.

3/6

High-order function: For automatic flash function, you only need to grasp the angle of light output to complete shooting, and for manual flash, you only need to grasp the output power.

Briefly introduce the debugging method. Function keys in different modes have different functions, which can be viewed through the information below the display screen. The display screen can show the position of the lamp holder. Canon 600 has four function keys corresponding to different functions in different modes, and the corresponding adjustment contents will be displayed at the bottom of the display screen. For general adjustment, four keys are used: zoom range, exposure compensation, surround flash and high speed/Hou Lian synchronous selection. In addition, the display will show the current inversion of the lamp holder.

4/6

Canon 600 can use the connecting cable to realize the off-camera flash, and use the synchronous connecting cable to connect the flash and camera, and select Ext. 1/Ext. M mode, so it can work in the same way as the set-top box flash. The highest frequency output power is 1/4, and the highest is 500Hz.

5/6

Strobe: In Canon flash, it is mostly strobe mode. In this mode, it can flash 30 times at the frequency of 500Hz, and the output is1128, which is much larger than that of most sub-factory flashlights. For low frequency strongpoint, the highest output power 1/4 can be used for strongpoint. No matter in what mode, the Hou Lian synchronization function of Canon flash is adjusted by the flash. We can choose high-speed synchronization or Hou Lian synchronization for creative shooting.

6/6

On the color of the display screen, the master light is green and the slave light is yellow, and the slave light will not enter the standby state. Regarding the wireless flash function, Canon 600 can group the flash, support up to three sets of flash, and control five sets of flash at the same time. Select the main lamp or auxiliary lamp through the wireless button, and then control each group of auxiliary lamps through the main lamp. At this time, because there are many functions, you can select various adjustment options through the function key 4, and the adjustment method is the same as the manual flashing method.