How does the camera shoot fireworks video?

The camera can shoot fireworks, as shown below:

1, go to the location of the fireworks in advance to find an opportunity to put the photo on a tripod.

2. Using the exposure shutter speed of about 4S to shoot fireworks, we can see that the shot fireworks have a long trajectory, which is very similar to the fireworks people see. At this time, because it only takes about 10S for the fireworks to disperse, if the shutter speed is still too fast, the fireworks will disperse, and only the slow shutter can be used to shoot the fireworks into a light track.

3. I suggest you take a good view of yourself first, and then twist the focus ring to focus manually. Manual Focus Remember to enlarge the picture to see if the focus is successful.

Matters needing attention

1, if it is a long exposure, in order to avoid camera shake, the anti-shake of the fuselage or lens should be turned off.

2. Pressing the shutter will also cause the camera body to shake. It is recommended to use self-timer countdown mode or wired release to trigger the shutter.

3. Location is also very important. In windy conditions, the smoke from fireworks explosion will interfere with the imaging effect, so don't stand in the upper or lower air outlet.

The skills of shooting fireworks videos with mobile phones are as follows:

Mobile phone: iPhone 14

System: IOS 16. 1.2

1. Turn off HDR and flash.

The light is bad at night. If HDR function is turned on, the photos will be blurred, because the time from explosion to falling of fireworks is very short. Turning on the HDR function will slow down the speed and blur the photos. In addition, it is best not to turn on the flash. Fireworks are actually far away, and the irradiation distance of mobile phone flash is usually only about 1.5 meters. At this time, using a flash will lead to inaccurate focusing and exposure.

2. Exposure locking

If you shoot fireworks at night, the background is usually a dark sky and empty; Fireworks are launched quickly and won't stay in the air for long. In this case, it is difficult for the mobile phone to focus accurately, resulting in the fireworks photos being pasted. With the exposure lock function, this problem can be solved well. When the first wave of fireworks is scattered, you can quickly hold down the screen to lock the focus, and then you can wait for the next wave of fireworks to take off and bloom.

Parameter setting of mobile phone shooting fireworks

1. Set the shutter speed to a slower speed, such as 1 to 4 seconds.

2. Set the ISO sensitivity between 100 and 400. This is set according to your own environment. If the light is bright, set it to ISO 100. If it's too dark, try ISO around 200. In addition, we need to pay attention to maintaining the stability of the mobile phone when shooting, so we need a tripod to stabilize the mobile phone, so that we can shoot a smoother fireworks effect when the shutter is slow.

3. Some mobile phones also have the function of slow door and light drawing. You can also use this function, and you can also take beautiful fireworks photos.

4. We can also prepare a Bluetooth remote controller for mobile phones, so that after putting the mobile phone on a tripod, we can use the Bluetooth remote controller to achieve maximum anti-shake.

5. When shooting fireworks, you need to find a reference object closest to the fireworks when shooting, so you can click on this reference object when shooting, and then you can complete accurate manual focusing.

Setting of SLR parameters for fireworks shooting

The parameter setting method of SLR shooting fireworks is as follows:

1, take all the equipment, come to the venue where the fireworks show will be held in advance, and occupy the relatively good frontier position. The tripod is used to fix the SLR camera, and it is best to add a hood to the lens. If the cable is released, connect and debug it first.

2. Debug the camera. Towards dusk, you can start. Because long exposure will produce noise, in order to reduce this phenomenon, the ISO value of camera sensitivity should be adjusted lower, and it is recommended to be below 400.

3. Then turn the exposure mode dial to the full manual M range. In this way, the shutter and aperture of the camera can be adjusted manually to achieve the desired effect.

When the fireworks start, start shooting. The basic strategy is smaller aperture, F8 or above, and longer shutter time. After selecting the aperture, look at the exposure prompt bar in the viewfinder to adjust the shutter speed. When shooting fireworks, the rule is that you would rather be slightly overexposed than underexposed.

5. Pay attention to composition. It is suggested to shoot with the wide-angle camera, and some pictures can be left to urban buildings as a foil.

How to shoot a video with fireworks and turn the screen black?

1. Use a camera with night vision function;

2. Adjust the ISO sensitivity of the camera to increase the exposure time;

3. Aim the camera at the place where the fireworks are launched;

4. Using shutter synchronization technology, adjust the shutter delay value in the camera window;

5. Adjust the ISO sensitivity to the lowest;

6. Use external flash to trigger fireworks;

7. Adjust the exposure mode of your camera to make the fireworks form a complete image;

8. Adjust the screen color to the lowest, and then adjust the screen to black in the camera view.

How to shoot fireworks with SLR?

Single lens reflective viewfinder camera, also known as SLR camera. Refers to a camera that uses a single lens, through which light shines on the reflector and takes a view through reflection. Here is how to shoot fireworks with a SLR, please refer to it!

How to shoot fireworks with SLR?

Tools/raw materials: SLR camera, tripod.

Methods/steps:

1, you must use a tripod when shooting.

Choose a relatively open place when shooting, you can shoot from multiple angles, and there is no shelter around. In addition, the choice of shooting wind direction is also very important. It is not good to go against the wind. It is recommended to choose a direction of 45 to 90 degrees with the wind direction.

3, the choice of aperture size

The larger the aperture, the shorter the exposure time; The smaller the aperture, the longer the exposure time. Because fireworks will continue to glow in the air, a slightly smaller aperture is generally selected, and it is recommended to use 5.6- 1 1. If you choose a smaller aperture, the fireworks will become very white near the flash part, and the effect is not good; If you choose a larger aperture, diffraction will occur and the photo-taking effect will not be good.

4, the choice of sensitivity

When shooting fireworks at night, it is dark around, so it is recommended to use manual focusing when adjusting the focal length. Go to the shooting location in advance, focus on the place where fireworks are to be set off, and then take a picture to see if the focus is accurate. There is no need to move the focal length after focusing.

6. Composition is also important.

When shooting fireworks, it is recommended to use wide-angle shooting, so that the composition will be simpler, and even if there are some deviations from the envisaged composition, you can get a satisfactory picture through cropping.

Note: For more exciting tutorials, please pay attention to the column of Tripartite Photography Tutorial. Sanlian photography group: 33895496 1. Welcome to join us.

How to shoot fireworks

Shooting fireworks requires camera setting first, then shooting opportunity, and finally composition.

First, camera settings

Fireworks are usually big scenes, so we often shoot with wide-angle lenses, which can show the spectacular fireworks well. The focus can be adjusted to manual focus, because the camera autofocus may be out of focus or inaccurate when shooting fireworks.

The principle of shooting fireworks is similar to that of light painting. It shows the beauty of fireworks by recording the trajectory of fireworks, so we need a slow shutter, which usually takes 3~5 seconds.

In order to ensure the clarity of fireworks, we need a deeper depth of field, so the aperture can be reduced appropriately, such as F8~ 12. Sensitivity should be as low as possible. Generally, the lowest sensitivity 100 can be used.

Second, the shooting time

The splendor of fireworks can only be best reflected at night, so you need a night with good air visibility to shoot. Be sure to arrive at the shooting point in advance before shooting. You need to set up a good camera and make a composition, which will take a lot of time. If you go late, you may be in a hurry.

In addition, remember to capture the earliest fireworks. Fireworks produce a lot of smoke when they bloom. The earliest fireworks smoke will be much less, and the fireworks that bloom later may greatly reduce the impression because of the smoke.

Third, composition

Choose the right scenery when shooting fireworks to avoid being monotonous. Such as tall buildings, trees, pools, etc. Can be used as foreground or background.

Trees or buildings can be placed at 1/3 of the picture as a landscape, so that fireworks occupy 2/3 of the picture; Or shoot a fireworks with a tree as the foreground; You can also use some water surface to form mirror symmetry.

Preparation before shooting

1. Before shooting, find a place close to the fireworks, with no shelter and a good view.

2. Turn off the flash without using the optical zoom function.

3. After the fireworks show starts, start shooting immediately to prevent smoke from blocking the line of sight after the party starts.

4. Because using HDR mode of continuous shooting 3 will slow down the shutter speed, it is best to turn off HDR mode.

In order to prevent lens shake during shooting, it is best to use tripods for both digital cameras and mobile phones. Even if you don't have a tripod, you should lean against a fixed object and hold the camera tightly with your hands.