How to use a wireless router? I lost my instructions. . .

As long as the wireless router is configured correctly, it can be used normally by plugging in the power supply and WAN port.

Setting method of wireless router:

1. The router is connected to the network.

As shown in the figure, connect the network cable to the WAN port of the router, and connect the computer to any Lan port of the router with the network cable. Start the computer. When the LAN port flashes, it means that the communication between the computer and the router has been successfully established.

2. The system is connected to the router.

Turn on the computer's wifi, search the default wifi name of the router (written on the nameplate on the back of the router), and connect to the wifi network. The first time you use a router, you generally don't need to enter a wifi password.

3. Enter the gateway interface.

Open a computer browser and enter the gateway ip address on the nameplate behind the router (generally192.168.1.1) to enter the gateway configuration interface. (The new route will automatically pop up this interface. )

4. Set the Internet access mode.

Enter the WAN port settings in the advanced settings. If broadband service needs dialing, please select PPPOE dialing, otherwise you can choose DHCP to get it automatically. PPPOE dialing requires entering the password of broadband account, and the connection mode is automatic connection. DHCP automatic acquisition does not need to be filled in.

5. Set the wifi name and password.

Enter wireless security in wireless settings and select WPA2-PSK as the security mode. WPA encryption rules select AES. Set the wireless network key. After the setup is completed, the router will automatically restart. Please enter a new WiFi password to connect.

6. After the configuration is completed, enjoy the network.