Travel guide from Shenzhen to Yunnan

1. Free travel from Shenzhen to Yunnan

I walked twice and the road conditions were good. The whole journey is about 1700 kg, passing through Guangxi to Yunnan. Except for 120KG national highway, Mile County in Yunnan Province is expressway. The itinerary is as follows: Guangzhou-Shenzhen Expressway to Guangzhou, Guangzhou to Foshan, Yangxi, Yangjiang, Maoming, Zhanjiang, Zhanjiang to Beihai, Guangxi, and then from Beihai to Nanning, Guangxi. In Nanning, there is a ring expressway (there is a sign to Yunnan on the right). After leaving the expressway around the city, go to Baise, Guangxi, then about 130KG to Yunnan, to Funing, Yunnan, take the direction of Yanshan and Suolong Temple, get off Suolong Temple, then go to Maitreya and Shilin, and then Shilin to Kunming. Drive carefully after entering Yunnan. The road conditions in Yunnan are not very good, with many uphill and downhill roads and big bends.

2. Travel guide from Shenzhen to Yunnan

There are flights from Shenzhen to Kunming and Lijiang. It takes about 500 to 1000 flights from Shenzhen to Kunming.

It may take 1000- 1500 to reach Lijiang, Shenzhen. I suggest where to buy it online.

3. Raiders from Shenzhen to Yunnan are on the road.

Shenzhen Dali

792.3km, one hour and eight minutes a day, charging 735 yuan.

Shenzhen

1 Drive south from the starting point 126 meters, turn right and enter Fuzhong 3rd Road.

2 Drive along Fuzhong No.3 Road102m and turn left into Yitian Road.

3 Follow Yitian Road 1 19 meters, turn right and enter Shennan Avenue.

4 Drive along Shennan Avenue 100 meters.

59 1 m, turn right into Shennan Avenue.

Drive along Shennan Avenue for 3.9 kilometers, then turn right into Shennan Avenue (auxiliary road).

7 Continue along Shennan Avenue (auxiliary road) 109 meters, turn right slightly, take Guangzhou/Airport /G4/G 15 ramp (via Futian Toll Station) and enter Beijing-Hong Kong-Macao Expressway /G4.

8 Drive along Beijing-Hong Kong-Macao Expressway /G4 for 5 1.0km, then leave at Humen/Zhongshan/Zhuhai/G941,and turn left at the fork to enter Guanfo Expressway/G941/Dongfo Expressway.

9 Drive along Guanfo Expressway /G94 1 1/ Dongfo Expressway 24. 1 km, and get off at Panyu Avenue/Jiaoting/Nansha District Exit (via Jiaoting Toll Station).

0 drive 185 meters and enter Panyu Avenue South.

1 drive 0.8km south of Panyu Avenue and enter Nansha Avenue.

Drive along Nansha Avenue for 7.5 kilometers, then turn right into the auxiliary road.

13 Continue to drive along Nansha Avenue (auxiliary road) 125m, turn right slightly, take G1501Shunde/Nansha/Sanshui/Luogang ramp (via Yuwotou toll station), head for Sanshui/Zhaoqing, and enter Guangzhou Ring Expressway/g/.

14 Take Guangzhou Ring Expressway /G 150 1 77. 1 km, exit Zhaoqing/Yunfu and enter Guang Kun Expressway /G80/ Guangwu Expressway.

15 Follow Guang Kun expressway /G80/ Guangwu expressway120.8km, then turn left into Luo Yang expressway /S5 1.

16 Follow Luoyang expressway /S5 1 for 27.6 kilometers and enter expressway /S26 in Shenluo.

17 Drive along Shen-Luo Expressway /S26 for 37.7 kilometers (via Tan Bin provincial boundary main line toll station) and enter Cen Jin Expressway.

18 Drive along Cen Jin Expressway for 39. 1 km and enter Guang Kun Expressway/Nanwu Expressway /G80.

9 Drive 224.9 kilometers along Guang Kun Expressway/Nanwu Expressway /G80, exit Nanning/Baise and enter Quannan Expressway/Liunan Expressway/Guang Kun Expressway/Nanwu Expressway /G72/G80.

20 Drive 50.5km along Quannan Expressway/Liunan Expressway/Guang Kun Expressway/Nanwu Expressway /G72/G80, and get off at Beihai/G721/Airport/Friendship Pass/Hechi/Guizhou/Baise/Yunnan /G75/G80, heading for Nanning Ring Expressway (north

2 1 Drive along Guang Kun Expressway /G80 for 227.9 kilometers, get off at Longlin/Kunming/Xingyi/Tianlin /G78 and enter Shankun Expressway /G78.

2 Drive along Shantou-Kunming Expressway /G78 for 304.5km (via Pingban Toll Station and Chajiang Toll Station) and enter G324/ Zhaojiang Highway.

Drive along G324/ Zhaojiang Highway for 91.3km (via Jinji Toll Station) and enter Shankun Expressway /G78.

Drive 50.5km along Shankun Expressway /G78 (via Fayu Toll Station and Zhaokua Toll Station), exit Shilin/Kunming /G78 and enter Shankun Expressway/Xishi Expressway /G78.

Drive along Shantou-Kunming Expressway/Xishi Expressway /G78 for 39.0km, leave at the exit and enter Shantou-Kunming Expressway /G78.

26 Drive along Shankun Expressway /G78 for 75.3km (via Xiaoxicun Toll Station) and enter Hangrui Expressway /G56/AH 14.

Drive along Hangrui Expressway /G56/AH 14 for 3 15.2km (via Kunming West Toll Station) and depart from Dali /Xi 'an.

Drive 30m214m, turn right and enter Tailu.

3 1 Drive along Taiyi Road for 2.3km, get off at the first exit around the island and enter S22 1.

Follow S22 1 for 6.6 kilometers, turn around and enter S22 1/ Dali Line.

3 Drive along S22 1/ Dali Line for 0.8km to the end.

Dali city

4. The best tourist route from Shenzhen to Yunnan

Do you need nucleic acid testing from Shenzhen to Yunnan? Under the current epidemic situation, Shenzhen usually goes out. And in the railway station, airport boarding or taking a train, you need a nucleic acid test certificate, which can be tested 24 hours or 48 hours. If you go to Yunnan, you will generally need these nucleic acid certificates. If you go out now, you can't leave without a nucleic acid certificate. Because foreigners' nucleic acid tests will be checked all over the country.

5. The best route map from Shenzhen to go on road trip.

The best self-driving route from Kunming to Shenzhen is: Kunming starts from Shankun expressway, passes through Yunnan, Guangxi and Guangdong provinces, and the main routes are Shilin, Lvliang and Luoping in Yunnan, enters Xingyi and Anlong in Guizhou, Baise, Chongzuo, Guigang, Wuzhou and Nanning in Guangxi, Luoding, Zhaoqing, Zhongshan and Guangzhou in Guangdong, and finally arrives. The total length of the line is about 1450km, and the toll is about 760 yuan.

6. The best route for free travel from Shenzhen to Yunnan.

From Kunming, Yunnan to Shenzhen1438km, passing through Shankun Expressway and Guang Kun Expressway. The route takes 16 hours and 56 minutes, and the toll is 793 yuan. Internal driving scheme of Yunnan province

1) Drive west from the starting point 120m and turn left into Huashan South Road.

2) Drive along Huashan South Road for 20 meters and turn right into Zhengyi Road.

3) Drive along Zhengyi Road for 230m, pass Justice Square on the left and turn left into Renmin Middle Road.

4) Drive along Renmin Middle Road for 590 meters and turn right into Qingnian Road.

5) Drive along Qingnian Road for 930m. After crossing Desheng Bridge for about 60 meters, go straight into Xunjin Street.

6) Drive along Xunjin Street 1. 1 km, cross Huannan Bridge for about 70 meters, and go straight into Nanba Road.

7) Drive along Nanba Road 1. 1km, cross the south overpass and go straight into Guannan Avenue.

8) Drive 40 meters along Guannan Avenue, cross Guannan overpass, drive in the direction of Fude overpass/Shilin, turn right ahead and enter Guannan overpass.

9) Drive along Guannan overpass for 230 meters, cross Guannan overpass for about 50 meters, and go straight into Hangrui Expressway.

10) Drive 2.3km along Hangrui Expressway, cross Fude Overpass, turn right into Guang Kun Expressway, and drive in the direction of Kunshi Expressway/East Third Ring Road/Zhujiacun Overpass/Yuxi.

1 1) Drive 550 meters along Guang Kun Expressway, cross Shihuyakou Overpass and go straight into Guang Kun Expressway.

12) Drive 7.0km along Guang Kun Expressway, cross Xiaoshiba Overpass about 1. 1km, and go straight into Kunshi Expressway.

13) Drive 8.8km along Kunshi Expressway and go straight into Xiaotuanshan Tunnel.

14) Drive along Xiaotuanshan Tunnel 1.2km and go straight into Kunshi Expressway.

15) Drive along Kunming-Shijiazhuang Expressway 17.8km, cross Yang Zong Second Bridge about 1.2km, and go straight into Yang Zong Tunnel.

16) Drive along Yang Zong Tunnel for 2.7 kilometers and go straight into Kunshi Expressway.

17) Drive along Kunshi Expressway for 3.8km, cross the tiankeng on the right side for about 1.5km, and go straight into Qingshuigou Tunnel 1.

18) Drive along Qingshuigou 1 tunnel for 380m and go straight into Kunshi Expressway.

19) Drive along Kunshi Expressway 1.3km, and go straight into Qingshuigou No.2 tunnel.

7. Travel strategy from Shenzhen to Yunnan

There is a high-speed train from Shenzhen to Yunnan. 12306 official website shows that up to now, there are three trips from Shenzhen to Yunnan, namely, G2926, G3 12 and G2922.

G2922/3 and G2926/79 high-speed EMU trains from Shenzhen to Kunming were officially launched on June 5, 2008. From 01612.2618, the railway department officially sold train tickets. After the train is opened, it takes only 7 hours to get from Shenzhen to Kunming by bullet train.

The newly opened G2922/3 from Shenzhen North to Kunming South passes through Shanghai-Kunming high-speed railway, Guiyang-Guangzhou passenger dedicated line and Guangzhou-Shenzhen-Hong Kong expressway. The new train departs from Shenzhen North at 15:25 pm, stops at Guangzhou South Station, Guiyang North Station and Qujing North Station, and arrives at Kunming South Station.

The train 16:0 1 arrives at Guangzhou South Railway Station and stops for 6 minutes. The arrival time at Guiyang North Station is 20:26, and the stop time is 4 minutes. The arrival time at Qujing North Station is 2 1:53, and the stopping time is 2 minutes. Arrive in Kunming

The Shanghai-Kunming high-speed railway is also the first time that an EMU with a speed of over 300 kilometers per hour has entered the southwest of China since the China Railway was speeded up many times. It is of great significance to the social and economic development in southwest China, marking the official entry of Yunnan into the era of high-speed railway. The opening and operation of Shanghai-Kunming Railway and Yunnan-Guangxi Railway marks that Yunnan high-speed railway has grown from scratch, connecting the entire high-speed rail channel and network.

Refer to the daily online-Shenzhen North-Kunming South High-speed Railway 65438+1starting from 554 yuan on October 5.

Refer to China 12306- Shenzhen-Kunming train enquiry.