I've never been in an RV. What is the structure inside the RV?

The internal structure of RV is basically divided into driving area, reception area, kitchen, bathroom and sleeping area. Take type c RV as an example. The reception area is equipped with sofa seats and lifting platforms. The kitchen area is generally equipped with an induction cooker, sink and refrigerator. The bathroom is equipped with a washbasin, toilet seat and shower. Sleeping areas are generally equipped with big beds, and some RVs have storage rooms under them. Some C-cars will also be equipped with forehead beds, and a car LCD TV will be turned up on the bed. If it is a small forehead, an electric lifting bed will generally be set up.

If it is a B-type RV, each area will be slightly smaller, and each configuration will be different due to different vehicle designs.

The interior equipment of RV is based on lightweight and comprehensive space layout and use function. The design is simple, but "complete". The internal equipment panel is mainly divided into two parts: the upper part is divided into the storage state of water tank and battery, and the lower part is divided into the function keys of basic equipment of RV. The storage state of the water tank and battery shows the water level of the water tank, indicating the water quantity of each water tank, which can be replenished and discharged in time. The battery storage state indicates the remaining power supply of RV. Before using the equipment in the RV, first turn on the main power supply of "12V power supply" of the RV, and then press the button corresponding to the required equipment. The toilet matched with the toilet is rotatable. Due to the limited toilet space of RV, the design of rotating toilet makes full use of the whole toilet space. The blue button is used to flush the toilet, and the LED to the right of the blue button is used to judge whether the black water tank is full. When the LED light is on, it means that the black water tank is full and needs to be emptied immediately. A washing faucet is the same as a shower head. If you need a shower, you can unplug the tap. If you need hot water, you can click the "Heat" button on the internal equipment panel.

The card holder in the living room can be assembled into a single bed, which is suitable for children to rest.

The splicing method is very simple, with only three steps:

1. Press the locks on both sides of the top of the small table (press release and lift the lock) to remove the small table and table legs from the side.

2. After fixing the small table board with the side lower guide rail, adjust the driver's seat forward and pull up the bracket under the seat.

3. Put a sponge mat on it to complete the splicing of single beds.

When the RV stops for a rest, you can put down the curtains and separate it from the driver's seat in space. Have a good sleep.