Traditional Culture Encyclopedia - Tourist attractions - How to clean and maintain four-piece products?

How to clean and maintain four-piece products?

If the four-piece products commonly used in bed are used for a long time, it is easy to produce a lot of dirty stains. Do you know how to clean them at this time? The following is how to clean four-piece products compiled by Bian Xiao, hoping to help you.

How to clean the four-piece product (1) Points for attention when cleaning and maintaining various fabric products:

1. Please do not use bleach, hot water, warm water and cold water when washing.

2. When washing dark bedding, the soaking time shall not exceed 10 minute (including light and dark products). Be careful not to wash it locally, wipe it on a large area, and don't mix it with other light-colored fabrics.

3. When changing seasons, the bedding should be washed clean, dried and stored in a dry place, and aired regularly in the humid areas in the south.

(2) Bedclothes are generally not easy to be dirty in a large area and easy to clean and maintain, but the washing and maintenance methods of different fabrics are very different. Before washing and maintenance, you should check the washing mark of each product.

1. Silk or silk cotton fabric products

① Washing: Dry cleaning is the best way. If the washing label indicates that it can be washed, please add an appropriate amount of neutral soap or silk cotton detergent to the cold water. After completely dissolving, refer to the washing instructions, then soak the product and wash it gently by hand. Pay attention to avoid twisting, so as not to damage the fabric and luster. After thorough cleaning, roll it up with a towel and squeeze out too much water. Then smooth the fabric along the seams and dry it in a ventilated place without direct sunlight, which is very necessary to keep the bright color of silk fabric.

After washing and ironing, the luster of silk fabric can be restored. When the fabric is 80% dry, you can cover the back of the silk fabric with white cloth and iron it at low temperature along the warp direction of the fabric. The temperature of the iron should be adjusted between 1 10℃ and 120℃, otherwise it will cause yellowing. Don't spray water when ironing, lest stains affect the appearance.

② Preservation: The first point of silk preservation is cleanliness and dryness. Because silk belongs to protein fiber of animals, if it is not cleaned or dried adequately, it will easily cause moth-eaten, yellowing or deterioration. It would be better if you put a moisture absorbent in the storage area. In addition, white silk products should not be put in moth balls or in camphor boxes, otherwise they will turn yellow. It can be wrapped in dark blue cloth with good color fastness to avoid yellowing.

2. Cotton fabric products

Cotton fabric has strong alkali resistance, acid resistance and high temperature resistance, and can be washed with soap or other detergents. You can soak in water for a few minutes before washing, but the time should not be too long to avoid damaging the color. Generally, the washing temperature does not exceed 40℃, and backwashing is appropriate; If there are decorations, please take them off before washing. Cotton fabrics with sweat stains should not be soaked in hot water to avoid yellow sweat spots.

When you rinse, can you master it? How many times? Method, that is, you don't have to use a lot of water for each rinse; But it needs washing several times. After each washing, wring it out and wash it again to improve the washing efficiency. It should be aired on the opposite side in a ventilated and cool place, not exposed to the sun to avoid fading. The temperature during ironing is lower than 1 10oC. Fold neatly when collecting, and store in a ventilated and dark place. Light and dark fabrics should be stored separately to prevent shadows and yellowing.

3. Cotton and linen fabric products

Because hemp fiber has high rigidity and poor cohesion, it is washed more gently than cotton fabric. It is forbidden to brush hard with a hard brush, so as to avoid the fuzzing of the cloth surface and affect the appearance and service life of the product. Don't twist it hard, don't soak it in hot water, and don't expose it to the sun, lest the product shrink, deform and fade. The temperature during ironing is lower than 1 10oC. Store in a ventilated and dark place.

4. Lyocell fabric products

Can be washed with conventional detergent, washed clean, washed separately from other fabric products, and the water temperature does not exceed 30℃. It should be softer than cotton fabric when washing, avoiding hard rubbing, hard brushing and twisting. Fold the water out after cleaning. It should be aired on the opposite side in a ventilated and cool place, not exposed to the sun to avoid fading. The temperature during ironing is lower than 1 10oC. Fold neatly when collecting, and store in a ventilated and dark place.

5. Other special fabric products

All-polyester and polyester-cotton fabrics: Use general detergent at room temperature, first soak in cold water for 15 minutes, and the water temperature should not exceed 40oC. After washing, you can generally dehydrate or wring it out by hand and put it in a cool and ventilated place to dry. It is not allowed to be exposed to the sun, nor should it be dried to avoid wrinkling due to heat. Usually it can be ironed at low temperature.

6.lace fabric

Small fabric products, such as small square pillows, pillowcases and cushion covers, can be put in laundry bags and washed with neutral detergent. Concentrated laundry detergent, bleach and other detergents harmful to fabrics are not allowed. For products with lace quilt cover, it is best to turn the quilt cover upside down and wash it. After washing, the lace part is ironed at low temperature to keep the lace pattern from deforming.

7. Viscose fabric

Wash with neutral detergent, and the washing temperature should not exceed 40oC. After washing, fold the fabric and squeeze out water by pressing to avoid distortion. Avoid sun exposure and dry in a cool and ventilated place. Usually it can be ironed at low temperature.

Precautions for the maintenance of four-piece bedding: First, always clean the pillowcases and sheets of bedding. Lying in bed after a hard day's work can easily bring dust and bacteria to the bedding. Especially pillows, few people wash their hair every day when the weather is cold. So, the pillow is dirty. Regular cleaning can not only wash away dirt and bacteria, but also maintain the life and comfort of bedding, which is necessary.

Second, in autumn and winter, bedding is not often washed. Be sure to keep the four-piece bedding clean and tidy, and don't throw the changed clothes on the bed at will. It is best to go to bed after washing every day. Don't let pets run to the bed with pets. You can wear a hat without washing your hair at night.

Third, we often change the direction of the quilt or sheets. Generally speaking, our sleeping posture is relatively fixed. Due to the different compression and application scope of bedding, it is easy to cause the bedding to fold or fade locally. Change it every three months or so If it is two sides of AB, it can be used in reverse. Use bedding in a balanced way.

Fourthly, humidity does great harm to articles. Especially for textiles, it is very aggressive. Therefore, keeping bedding dry is an important part to ensure its life and comfort. When you don't sleep, you often open the window for air. Can you change the indoor air and put the bedding? Breathe? Kill two birds with one stone.

One of the misunderstandings in the maintenance of four-piece bedding sets is not to be exposed to the sun when cleaning bedding. Everyone knows the principle of thermal expansion and cold contraction. Exposure to the sun or exposure for too long is easy to make the quilt swell, and if it is cotton bedding, it will also lead to falling off. If silk is exposed to the sun for a long time, it will deteriorate and break. For example, the same is true of other wool and down. Don't be exposed to the sun or for a long time. Just put it in a ventilated place for a few hours.

Second, no, it is best to take out the filled items when drying, so that the drying effect is good. For some more arrogant, not suitable for direct image, you can cover it with a layer of gauze. Can be protected from high temperature damage.

Third, don't pat hard when drying, which is an old tradition in our country. I used to do this because the quilts at that time were mostly cotton and there were not so many proud fabrics. I can't fight hard now.

Maintenance of sanding four-piece set Maintenance skills of sanding four-piece set 1

In autumn and winter, bedding can't be washed often. So in this case. Then you should pay attention to keep it as clean as possible, especially some people who like to keep pets, and try not to let pets run around on the bedding.

Maintenance skills of sanding four-piece set II

General humidity does great damage to bedding, so keeping bedding dry is an important part to ensure its life and comfort. If you don't sleep, open the window as soon as possible to breathe and keep the room dry at any time.

Maintenance skills of sanding four-piece set III

There is another thing we should pay attention to in life, that is, don't expose the washed scrub to the sun. If the quilt is exposed to the sun or for too long, it is easy to swell and fall off. Just put it in a ventilated place for a few hours after cleaning.

Maintenance skills of sanding four-piece set

It's best to take out the filler when polishing in the sun, so that it will be better in the sun. If you are still worried about dryness, you can cover it with a layer of gauze when grinding and drying.

Guess you are interested in:

1. How to clean and maintain the leather clothes at home correctly?

2. How to clean straw mats

3. Cleaning and maintenance methods of cotton and linen clothes

4. What are the cleaning and maintenance methods of windbreaker at home?