Illustration of how to wear a shoe belt

The answer to the illustrated shoelace encyclopedia is as follows:

1 type: cross knot

1, one end is knotted from internal measurement, the other end is punched in turn, and then a blank is jumped in;

2, according to the same method has been tied down, after repeated, the remaining shoelaces can be stuffed into the knot;

3. Other shoelaces are punched in sequence in the same way;

4. Wear it from below and then from above;

5. Choose harmonious shoelaces according to the color of shoes, and tie the extra shoelaces inside.

Type 2: Double straight knot

1. After a certain length, a shoelace passes through the left hole and enters from the right hole, and the shoelace passes in the direction of the dotted line;

2. Adjust the shoelaces to keep them in a straight line, don't roll them up, and stuff the extra parts into the shoes;

3. Similarly, leave another shoelace inside for a while and tie it with the yellow shoelace inside;

4. Tie your shoelaces in the direction of the dotted line;

5. Adjust the second shoelace so that the redundant part is connected to it;

6. The extra part is tied with the yellow shoelaces on the inside of the shoes.

Type 3: kink

1, two shoelaces are tied inside and released;

2. After the two shoelaces are crossed, they pass through the second hole;

3. At this time, in order to center the intersection as much as possible, tighten the shoelaces;

4. Summarize the process of centering the intersection point as producing a twist, leaving the last hole;

5. Finally, X-shaped treatment is adopted, which makes it easier to take off shoes;

6. The remaining shoelaces are tied together in the shoes.

Type 4: Diagonal Knot

1. After passing through the first space, tie a single knot inside, and the other end passes through the third hole on the left from inside to outside;

2. The shoelace passes through the second hole on the right;

3. Complete the diagonal knot with blue shoelaces;

4. Tie a diagonal knot with a white shoelace in the opposite direction;

5. Continue to tie white shoelaces like blue shoelaces;

6. The blue and white shoelaces finally came out of the hole in the tongue;

7. You can appreciate the way the tongue comes out. A little looser will make your feet more comfortable!

Type 5: Trapezoidal knot

1, after adjusting the length of both ends of the shoelace, pull the shoelace from the inside out;

2. Pull out the shoelace and thread it into the second hole from the outside;

The shoelace on the left comes out from under the shoelace between the two spaces on the right, and the shoelace on the right is the same. Repeat this step;

4. Pay attention to the direction of the crossed shoelaces at both ends;

5, the extra shoelaces are tied into the gap, and the perfect shape is just around the corner.

Type 6: Internal X-knot

1. After the shoelaces at both ends are consistent, both ends respectively pass through the second space;

2. Pass through (1) hole, enter (2) hole and pass through (3) hole;

3. Repeat steps (1) (2) and (3);

4. The length of shoelaces needs to be 90-95cm, and the final remaining length is shown in the figure;

5. finally, tie the knot on the inside, and the perfect shape is just around the corner.

Type 7: Double X Junction

1, from the second space, through the shoelaces from outside to inside;

2. Tie the end of the white shoelace with the inside of the match by X knot method, and then tie the knot;

3. Wear the first hole in the blue vamp, tie an X knot and cross the intersection of white shoelaces;

4. Tie the end of the blue shoelace;

5. The remaining lines are longer. You can make a circle around the outline of a city and go through it after several turns.