How to use Canon camera 90D tripod?

1, using the camera tripod, you can first install the quick assembly board on the tripod on the camera. The camera itself will have screw holes, just tighten the quick assembly board and the screw holes on the camera. The camera is equipped with a quick-loading board, which makes it more convenient to use a tripod.

2. First, we take out the camera tripod. Next, we don't need to install the camera first, but we need to adjust the tripod first. Lay the tripod flat and fix the angle. There are limit grooves with different angles on the tripod. According to the terrain and the scenery to be photographed, determine the angle, and the three angles should be consistent.

After adjusting the angle, the next step is to adjust the length of the tripod. The tripod is divided into several parts. After determining the height, adjust the height of the tripod section by section. After adjusting to the set height, tighten it with tripod fixing screws.

4. After adjusting the angle and height, you need to adjust the translation/tilt. The platform is divided into three-dimensional pan-tilt and spherical pan-tilt, of which three-dimensional pan-tilt is the most commonly used. The spherical pan-tilt is portable. It has a horizontal rotating knob and two ball fixing knobs, which can be adjusted according to your own needs.

5. If you want to shoot horizontally, you need to adjust the level on the pan/tilt, and then install the camera.

6. If you want to choose an angle to shoot, you can first remove the assembly board from the tripod, and then install the assembly board on the camera. After adjusting the angle, the camera with quick-loading board is fixed, which is not only convenient, but also will not affect the adjusted angle.

The above is what I saw in the Pacific official! !

Hope to help you, hope to adopt! !