Traditional Culture Encyclopedia - Tourist attractions - Is the common green space in the park a real lawn? How is the artificial lawn made?

Is the common green space in the park a real lawn? How is the artificial lawn made?

Do you know whether the lawn you see in your life is true or not? The appearance of artificial lawn has greatly replaced the existence of real grassland. This is a brand-new field, and it is no longer necessary to mow the grass manually and glue it to weed.

First, this big bag of white plastic pills is the beginning of making them. In addition, they will add the same proportion of green plastic pills to add color to it. After melting these plastics, the equipment will extrude them from the steel plate with holes at the bottom, which will make them produce green mice, which will collectively cool and solidify them through the sink below. Then the machine will pull the wire harness through the huge comb to separate them from each other and continue to the next stop. Here, the roller will lengthen these wire harnesses until they become as thin as needle grass. This elongated action can also strengthen them.

Second, after completion, these wire harnesses will be wound up by spools. When the spool is full of wire harness, the staff will take it off the spool and then transfer it to another workshop for disassembly. Here, the wire harness will be woven into dobby synthetic yarn, and then the yarn will pass through the guide rail, which can prevent them from coming loose when they are wound up by a big spool. In production. At the bottom of the line, the machine is merging the mesh fabric with the synthetic fabric. At this time, multiple strands of synthetic yarn will reach the dissolver through the pipeline.

Thirdly, the dissolution accelerator is a huge sewing machine with as many as 250 needles. These needles will hook the yarn through the synthetic fiber fabric with mesh, and they can finish hundreds of rows of sewing work in one minute. When the needle penetrates the synthetic cloth, the lower knife will cut off the looped yarn and make it look like a real blade of grass. At the normal running speed of the machine, this process is much faster than waiting for real grass to grow. In order to ensure the uniform distribution of these yarns, an inspector will check the sewn turf again, and then the machine will send it to the coating roller. The roller will first glue from the groove under its jurisdiction, and then apply it to the passing turf for weighing, so that the artificial turf will be bonded to the lining. At this time, the glue on the surface will be very wet, so it must be dried next. They will gradually enter the dryer driven by multiple rollers.

Fourthly, the staff must control the internal temperature very carefully, because too hot will cause the synthetic grass leaves to melt and then send them out for drying. At the same time, the hot needles on a huge roller will make holes everywhere in the turf, which will make them have the ability to seep water. Now, the workers will check it for the last time to ensure that the appearance of these sods is intact. They will pull out some loose grass and test its length. Then, they will be sent to a device that simulates football shoes.