Traditional Culture Encyclopedia - Tourist attractions - What is the name of the router?
What is the name of the router?
The Chinese name of the router is Router, and the English name is Router.
Routers are devices that connect various local area networks and wide area networks in the Internet. It will automatically select and set the route according to the channel conditions, and send signals in turn according to the best path.
Routers are the hub of the Internet and the "traffic police". At present, routers have been widely used in all walks of life, and products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.
Extended data:
Routers can also be called gateway devices. Router is the network layer relay and layer 3 relay task completed in OSI/RM. It stores and forwards data packets between different networks, and its main purpose is to separate networks with different logics.
Data is transmitted from one subnet to another and can be processed by the routing function of the router. In network communication, routers have the functions of judging network addresses and selecting IP paths.
Baidu encyclopedia-router
1. Generally, the service name on a PPPOE server has only two states. One is designated, which means that when dialing, you must enter the correct name provided by the official before you can connect, otherwise you will report an error.
2. The other is arbitrary. If you enter any characters or leave them blank, you can dial. Now you should be able to connect normally by setting the PPPOE account password in the router, and you don't need to enter the service name, because there is no difference between any characters and spaces.
3. If 69 1 appears when dialing on the computer, please re-establish the connection and try to leave the service name blank. Maybe it's a mistake.
4. If the service name must be entered, it may also be a special means to block the local router. Some routers support special dialing, but generally different versions of firmware are brushed according to different regions.
Extended data
Router settings
1, line connection
When the router is not used, the computer is directly connected to the broadband Internet. Now using a router to surf the Internet requires a direct connection to broadband. According to the different broadband lines, it can be divided into three access modes: network cable, telephone line and optical fiber.
2. Log in to the router
Open IE browser on the computer desktop, clear the address bar, enter the router management IP address 192. 168. 1, and press enter to pop up the login box.
When entering the router management interface for the first time, in order to ensure the safety of your equipment, you need to set the password for managing the router. Please set it according to the interface prompts.
Step 3 Set up Internet access
After entering the router management interface, click Next.
Internet access mode selection _PPoE(ADSL virtual dialing) _ Next.
Fill in the broadband account and password provided by the operator in the corresponding setting boxes, and ensure that the account password is entered correctly.
4. Set wireless parameters
SSID is the wireless network name (which can be set according to actual needs). Select _ PA-PSK/WPA2-PSK _ (5) Pomelo _SK wireless password, and click _ Luanyoujian.
4. Setup is complete
Click Finish to complete the installation wizard.
So you can surf the internet.
Baidu encyclopedia-router
What is the router network name?
What is the wireless network name of the router? How to fill in its name in the SSID column?
The name is just a code name, just for the convenience of memory and distinction. SSID column, just fill it in yourself.
What is the name of the router?
Are you talking about the router you bought or a noun?
The name of the router used is the manufacturer model, and the router is also called the router.
What does the router mean by setting the user name to enter?
The us name to be entered in that rout settings is:
One: the login user name of the router.
1. Default login user name of the router: admin password: admin (if it is incorrect, look at the back of the router).
Two: the user name dialed by the router.
1 is the online account and password provided by the network service provider.
There are broadband user name, broadband password and wireless signal name in router settings. What are the wireless passwords?
Broadband account and password, consult your broadband operator, which company you apply for broadband, they will provide it. Wireless network setting is your own business, set it yourself.
Just bought a router! Why are there two networks? What's the name of this router?
Laibin network
When logging into the router, which name does the user name refer to?
Look at the bottom of the router. Usually, the administrator password is also admin.
What is the router network name and issd?
Wireless network name: It is the name issued by your wireless router to identify wireless devices. When it finds your wireless device, it will know that it is your wireless network.
The wireless network name is SSID.
How does the router recover the network name?
If you reset the router, you must reset the router.
1. Connect the line between the network cable, router and computer, and start the computer and router equipment;
2. After starting the device, open the browser and enter 192. 168. 1 in the address bar to enter the wireless router setting interface.
3. The account and password used to log in to the router will appear in the setting interface, and enter the default account and password admin.
4. According to the step-by-step setup of the setup wizard, select the Internet access mode. Usually ADSL users choose the first PPPoE. If you use other network service providers, choose the following two items according to the actual situation. If you don't know how to choose, automatically choose the first item, which is convenient for beginners to operate. Select and click Next.
5. Enter the account number and password applied from the network service provider, and go directly to the next step after the input is completed;
6. Set the wifi password, and try to make the alphanumeric combination more complicated and not easy to be hacked.
7. If the input is correct, you will be prompted whether to restart the router. Select Yes to confirm to restart the router, and then you can surf the Internet normally.
What is a router and what kinds of routers are there?
The so-called "routing" refers to the behavior and action of transmitting data from one place to another, and the Router is the machine that performs this behavior and action, and the English name is router. To put it simply, the router mainly has the following functions: first, network interconnection, which supports various LAN and WAN interfaces, and is mainly used for interconnection between LAN and WAN to realize communication between different networks; The second is data processing, including packet filtering, packet forwarding, priority, multiplexing, encryption, compression and firewall functions; Thirdly, network management. The functions provided by routers include configuration management, performance management, fault-tolerant management and flow control. One function of a router is to connect different networks, and another function is to select routes for information transmission. Choosing a smooth shortcut can greatly improve the communication speed, reduce the communication load of the network system, save the network system resources, improve the unblocked rate of the network system, and make the network system play a greater role. From the perspective of filtering network traffic, the role of routers is very similar to that of switches and bridges. However, unlike switches that work at the physical layer of the network and physically divide network segments, routers use special software protocols to logically divide the whole network. For example, a router supporting IP protocol can divide the network into multiple sub-segments, and only network traffic directed to a special IP address can pass through the router. For each received packet, the router recalculates its check value and writes a new physical address. Therefore, using a router to forward and filter data is usually slower than using a switch that only looks at the physical address of a packet. However, for those networks with complex structures, the use of routers can improve the overall efficiency of the network. Another obvious advantage of the router is that it can automatically filter network broadcasts. Generally speaking, the whole installation process of adding routers to the network is much more complicated than plug-and-play switches. Generally speaking, the interconnection between heterogeneous networks and multiple subnets should be completed by routers. The main job of the router is to find the best transmission path for each data frame passing through the router and effectively transmit the data to the destination. It can be seen that the strategy of choosing the best path, that is, the routing algorithm, is the key to the router. In order to complete; In this work, the related data of various transmission paths-routing table is stored in the router for routing; When in use. The path table contains subnet tags, the number of routers in the network, and the name of the next router. The path table can be fixed by the system administrator, dynamically modified by the system, automatically adjusted by the router or controlled by the host. 1. Static path table p The fixed path table set in advance by the system administrator is called static path table, which is usually set in advance according to the network configuration when the system is installed, and will not change with the future network structure changes. 2. dynamic path table p dynamic path table is a path table that the router automatically adjusts according to the operation of the network system.
The server name is required for broadband connection, and the router connection cannot reach 10.
You need to enter the name of the server for broadband connection. How to set up a router connection:
Just set the router to dial.
Home network environment wiring:
1, a modem: a modem)-router wan port; Router LAN port-computer.
2. No modem: network cable-router wan port; Router LAN port-computer.
Computer enters the router:
1, computer ip and dns settings are automatically obtained.
2. Open a browser, enter 192. 168. 1 in the address bar (this is the address of the general router or check the login information on the back of the router), and enter the route-enter the user name and password (the default is usually admin).
Set up router dialing:
1. Select PPPoE dial-up (some are ADSL dial-up) in the setup wizard, follow the prompts, enter the user name and password for accessing the Internet, and save.
2. In the network parameters-WAN settings, select normal mode, and in the three options of connection, select PPPoE dialing. The following are the options for automatically connecting, saving and quitting.
What is the wireless network name of the router? How to fill in its name in the SSID column?
The wireless network name of the router is: wifi network name.
The SSID number is a wireless name. Set the SSID to letters or numbers. You need to set up an account that is not broadband, and the name is arbitrary. The name is just a code name, just for the convenience of memory and distinction.
Extended data:
Then the SSID number is actually a bit like cable broadcasting or multicast, and it is also sent from one point to multiple points or the whole network. After receiving the SSID number sent by the router, the general wireless network card should first compare whether the SSID number to be connected is configured, if so, connect, if not, discard the SSID broadcast packet.
Readers who have experience in cable network maintenance must have heard of sniffer. Through sniffer, we can monitor our network card, so that the network card will record all the packets it receives and feed them back to sniffer.
Many of these packets are data that this network card should receive, and many are broadcast packets or multicast packets that should be discarded. Whether the network card receives these data or not, once the sniffer is bound to it, it will not hesitate to record these data and save these data information into the sniffer program.
Therefore, by installing a wireless sniffer, the wireless network can also be bound to the wireless network card to realize the detection and discovery of the SSID number.
Reference: SSID number
Baidu baike
What is the name of the router?
The Chinese name of the router is Router, and the English name is Router.
Routers are devices that connect various local area networks and wide area networks in the Internet. It will automatically select and set the route according to the channel conditions, and send signals in turn according to the best path. _ It's a good idea to talk about "traffic police". At present, routers have been widely used in all walks of life, and products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.
The main difference between routing and switch is that switching takes place at the second layer (data link layer) of OSI reference model, while routing takes place at the third layer, namely network layer. This difference determines that routers and switches need to use different control information when moving information, so they realize their respective functions in different ways.
- Related articles
- Where is the Qingdao Bada Gorge Tourist Speed ??Boat Terminal?
- After studying UI for so long, you still don't know how to design UI?
- Why are large enterprises such as Alibaba, Gree, Wanda, and BYD now heading to Ganzhou?
- Take the high-speed train to Ningbo in May, and visit the three scenic spots for free!
- Croatia Raiders Croatia must-see attractions
- How about Guangzhou Chanyouquan International Travel Service Co., Ltd.?
- 10 where is a good place to travel abroad in June?
- Can the New Zealand Visa Center official website make an appointment for a visa?
- Is it possible to realize a game with holographic technology?
- What is the best travel guide from Nanchang to Xiamen?