How to renovate leather shoes?

Leather shoes renovation has the following steps.

1. Remove the leather belt to be refurbished, wipe the vamp with a dry cloth or wet towel and dry it. Then apply leather cleaning agent (a leather chemical) to the surface of leather shoes again, wait a moment, and prepare to spray color.

2. Cover the places that don't need to be sprayed with masking paper or masking cloth.

3. Choose leather polish according to the color of the original shoes. It is best to choose a lighter color than the original one, and pour a little of the selected polishing solution (enough to spray L pairs of shoes) into the charging barrel of the spray gun. The spray gun is driven by a pedal air pump. The operator wears gloves, a spray gun in one hand and shoes in the other. The pedal air pump sprays polishing liquid.

Keep the spray nozzle 20 cm away from the vamp, spray it evenly, then let it stand for 1 min, dry it, pour the excess liquid material back into the big bottle, and wipe the material in the material tank with a cloth. Then take colorless leather polish and pour it into a vat, and spray another layer on the shoe surface and sole edge.

4. Blow dry with a hot air gun, and then cover the shoes with a cloth cover to prevent dust from falling, but be careful that the cover cannot touch the upper to avoid damaging the surface.

5. A pair of leather shoes is renovated after drying for a few minutes.

Extended data:

Precautions for leather shoes renovation:

1, spray gun nozzle must be clean, liquid materials must be free of impurities.

2. The raw materials used are flammable and should be properly preserved.

3, refueling, colored, colorless, white, light color liquid materials should be paid attention to separate, should wipe the cylinder, otherwise it will cause color mixing.