Dimensions and construction methods of rural firewood stoves: What are the rural firewood stoves like?

1. rural firewood stove size: height: the height of the stove should be between .85m~.85m or between .93m and 1.m.. Width: the width of the stove should be between .46 m and .6 m or between .56 m and .63 m.

2. The height and width mentioned here are the finished surface of the cooktop, that is, the net height and width after completion. Its height should be calculated from the zero height of the floor tile until the level of the stove. Its width is also the widest distance of the diameter of the table top. If the outside of the table top is arc-shaped, its widest diameter should not exceed .62m, and then it naturally bends to the narrowest distance, and its narrowest diameter should not be less than .49m m..

3. Determine the construction location, open the flue and build a chimney. The ground is marked to determine the position, and the wall is marked to determine the height. Excavate smoke exhaust duct in the wall. Build a chimney outside the house.

4. Ordinary brick stove body, including stove door ash outlet and stove chamber. Firebrick is used to build the stove chamber, and the space between the stove body and the stove chamber is filled with broken sand and gravel.

5. Heat preservation and fire-resistant construction of stove chamber and stove surface. Filled with heat preservation materials, the broken sand and brick sand used in the hearth are protected, and the refractory mud is compacted above the hearth with a pot, and the refractory mud is smoothed and shaped.

6, warm water mouth pot mouth construction. The pot has been placed before the construction of heat preservation materials and refractory mud. The contact position between the pot and refractory mud is surrounded by steel bars to ensure that the pot mouth is firm. Smoothing the stove surface with mortar is generally 78cm high.

7, tile decoration, installation of stove door flue damper. You need to wait fifteen days before using it.