How to make a propaganda newspaper with word-How to make a brochure with MicrosoftWord Four ways to make a brochure with MicrosoftWord

the easiest way to make a newspaper with word is to use columns and insert text boxes. Insert a picture for simple decoration. Then let me share with you the skills of using word to make newspapers, hoping to help you.

The steps to make a newspaper by using word are as follows:

Step 1: First, create a new document, and set the paper size and

margins

. I use horizontal A3 here, with the margins 3 cm up and down and 2.5 cm left and right. If you are holding it, set the text size to 5, or even smaller.

step 2: page layout-columns, more columns, set to 4 columns. If you don't want the column width to be equal, tick it off, and set the column width and spacing yourself.

Step 3: Paste all the text contents in to see how much space is needed. Because pictures are to be inserted, the contents in three columns are ideal. If there is too much content to delete, make the text smaller and smaller until it is stuffed.

step 4: insert a text box and set the title position roughly. Choose the appropriate font size and font, and align them scattered. These three parts can be combined.

Step 5: Use text boxes to make a general layout distribution according to the text content.

step 6: in order to facilitate the batch setting of titles, create styles, modify them, and set headline and subtitle styles as needed. My headline should be

??

small three, centered and bold. The subtitle is Song No.5, centered and bold.

step 7: locate the title and click the style to apply.

Step 8: Insert the text box if you need to cross the title and content of the layout, and set the surrounding mode of the text box to be up and down, with a fixed position on the page.

step 9: set the title, insert the appropriate picture, and surround the picture tightly.

step 1: you can add some decorations to the content such as reading guide, select the text content, design the page border, and make the following settings.

step 11: you can also set insert-prefix sinking.

step 12: after the whole thing is finished, decorate it further, remove the outline of the text box without it, add styles if you want, and so on.

step 13: finally, the simple newspaper effect is finished. Is it very simple? How to use Word to make handwritten newspaper/newspaper/poster?

the specific operation steps are as follows:

1. open Word, click page layout, paper orientation and landscape orientation, and set the tabloid to landscape orientation.

2. Enter the text to be used as a tabloid and set the size of the text.

3. Select the body part, right-click the mouse and select the paragraph.

4. Set the first line to be indented by 2 characters, with a fixed value of 18 points. Click OK.

5. Select the text to be column-divided, and then click the page layout, column-divided and left.

6. Click Insert Picture in turn, then select the prepared material picture and click Insert.

7. After inserting a picture, select a picture, and then click Format, Text Wrap, and Surround.

8. Next, make the border of the tabloid, click page layout, page border in turn, then select the box, select the appropriate artistic style, and click OK.

9. Click Insert, Shape, and Straight Line in turn, and then draw a horizontal line at the boundary between the first and second parts to ensure that the line is inclined horizontally.

1. A complete tabloid is completed. How to make a brochure with MicrosoftWord Four methods to make a brochure with MicrosoftWord

Method 1: Method 1: Office21 template 1. Open a word document. 2. Click "File Menu" in the upper left corner. 3. In the left column, click the "New" tab. 4. Select "Brochures and Brochures" from the available templates. 5. Select "Brochure" from the available templates. 6. Select the brochure template you want to use. 7. MicrosoftWord will pop up your brochure. 8. Replace the existing picture. 9. Click the Insert tab, and then click the Picture button. 1. Adjust the size and position of the picture. 11. Replace any existing text. Method 2: Method 2: Office27 template 1. Open a new Word document. 2. Select "brochure" from possible templates. 3. Download the template that meets the needs. 4. Edit the text again. 5. Add pictures. 6. Modify other elements. Method 3: Method 3: Manual production in Word27 or later 1. Click Page Setup >; Margins to set the margins. 2. Click Page Layout >; Direction to set the page to "landscape". 3. Click Page Layout > Column to choose the number of columns you want. 4. Add a column break. 5. Add a page break. 6. Repeat step 4 on page 2. 7. On the blank page, make a preliminary model of the brochure. 8. Add text and pictures to the column. 9. Print the test copy. Method 4: Method 4: Manual production in Word23 or earlier. 1. Click File >; Page setup > Margins to set the margins. 2. Click File > Print > Priority > Set your page to landscape orientation. 3. Click Page Layout > Column to choose the number of columns you want. 4. Add a column break. 5. Add a page break. 6. Repeat step 4 on page 2. 7. On the blank page, make a preliminary model of the brochure. 8. Add text and pictures to the column. 9. Print the test copy. Brochure is a way to promote corporate image with simple and cheap printed matter. The following methods will teach you how to use MicrosoftWord to create your own brochure. The first two methods use existing Microsoft templates, while the third and fourth methods teach you how to make your own brochures manually.

method 1: method 1: Office21 template

1. open a Word document. You can see a blank page.

2. click "file menu" in the upper left corner.

3. in the left column, click the "new" tab.

4. select "brochures and brochures" from the available templates.

5. select brochure from the available templates.

6. Select the brochure template you want to use. If you don't have a template, Microsoft will download it for you.

7. MicrosoftWord will pop up your brochure. Now you can layout it.

8. replace the existing picture. Click the picture box of the picture you want to replace and delete it.

9. Click the Insert tab, and then click the Picture button. Find and select a picture in a local file.

1. adjust the size and position of the picture.

11. replace any existing text. Click the corresponding text box, delete the original text, and type new text.

method 2: method 2: Office27 template

1. open a new Word document.

2. select "brochure" from possible templates. If your version of Word does not provide brochure templates, visit the Templates page of and select Brochure.

3. Download the required template.

4. Edit the text again. Just click on the text box and modify the text inside. Considering the practical application, you can also modify the font and color of the text, for example, don't forget to replace all the sample text. If there are words like "insert text description" on it, your brochure will look very unprofessional. Make sure that you have never missed anything, and change the color of the text that has been modified, so that those that have not been modified will be very eye-catching. When it is finally finished, you can change the color of the text back.

5. Add pictures. Click on the sample picture.

press "Delete" key to delete.

click insert, and then select picture.

browse the appropriate picture, and then click "insert".

wait for the picture to load. Note that the initial picture size and location may be far from ideal.

click and drag a corner of the picture to adjust. Click and drag the picture to the correct position.

6. Modify other elements. Add/change background color, drag the position of text box and picture box, increase the thickness of border, etc. Find out if there are any other places (text box, picture box, background) worth modifying in the page, just right-click and modify them in the pop-up menu.

Method 3: Method 3: Make it manually in Word27 or later

1. Click Page Setup >; Margins to set the margins. If you want to keep the page clean, you should leave at least .3 cm margin. Because the brochure is to be folded, it is best to make the content relatively small, and leaving the margins on the narrow side will help to leave room for text and pictures.

2. Click Page Layout > Direction to set the page to "landscape".

3. Click Page Layout > Column to choose the number of columns you want. The number of columns determines how many times the brochure can be folded. If you want to create a booklet folded in half, you need to set two columns on the first page and two columns on the second page.

if you want to create a booklet folded three times, you need to set three columns on the first page and then three columns on the second page.

You can change the margin and width of the column, but in most cases, the default settings will suffice.

4. Add column breaks. This will ensure that each column (panel) in your brochure has independent paragraph information. Make sure the cursor is in the upper left corner of the first column, and then select page layout >; Interrupt > Column. Your cursor should jump to the beginning of the second column.

if you have three columns, repeat this step for your second column. Your cursor will jump to the beginning of the third column. )

5. Add a page break. This will create a second page, which will become the outer page of the brochure. If the page doesn't appear, put the cursor on the right border of the column, and then select Insert >; Operator and then select a page break. Now the cursor will jump to page 2, which is the outer page of the brochure.

6. repeat the fourth step on page 2.

7. Make a preliminary model of the brochure on the blank page. This can help you lay out your Word document more rationally. Because the brochure is folded, some parts of the page will look unreasonable. ) Set a blank page to be displayed horizontally, and then write "Inside Page/Page 1" on one side and "Outside Page/Page 2" on the other side.

when facing the inner page/page 1, fold the page in half (so that you face the other half of the outer page/page 2) or in one third (so that you face two-thirds of the outer page/page 2), depending on whether you want to fold it in half or fold it three times.

treat the folded page as your brochure and mark it accordingly. Write "title" on the front panel, "information" on the inner panel, etc. The specific content depends on what kind of brochure you want.

expand the page to see if the positions of various elements are appropriate. For example, your title should be on the right panel of the outer page/page 2, which means it will appear in the right column of the second page of the Word document.

8. Add text and pictures to the column. Use your sample as a reference.

9. print the test copy. If necessary, adjust the document according to the test copy.

Method 4: Method 4: Manually create in Word23 or earlier

1. Click the file >; Page setup > Margins to set the margins. If you want to keep the page clean, you should leave at least .3 cm margin. Because the brochure is to be folded, it is best to make the content relatively small, and leaving the margins on the narrow side will help to leave room for text and pictures.

2. Click File > Print > Priority > Set your page to landscape orientation.

3. Click Page Layout > Column to choose the number of columns you want. The number of columns determines how many times the brochure can be folded. If you want to create a booklet folded in half, you need to set two columns on the first page and two columns on the second page.

if you want to create a booklet folded three times, you need to set three columns on the first page and then three columns on the second page.

You can change the margin and width of the column, but in most cases, the default settings will suffice.

4. Add column breaks. This will ensure that each column (panel) in your brochure has independent paragraph information. Make sure the cursor is in the upper left corner of the first column, and then select page layout >; Interrupt > Column. Your cursor will jump to the beginning of the second column.

if you have three columns, repeat this step for your second column. Your cursor should jump to the beginning of the third column.

5. Add page breaks. This will create a second page, which will become the outer page of the brochure. If the page does not appear, put the cursor on the right border of the column and select Insert >; Operator and then select a page break. Now the cursor will jump to page 2, which is the outer page of the brochure.

6. repeat the fourth step on page 2.

7. Make a preliminary model of the brochure on the blank page. This can help you lay out your Word document more rationally. Because the brochure is folded, some parts of the page will look unreasonable. ) Set a blank page to be displayed horizontally, and then write "Inside Page/Page 1" on one side and "Outside Page/Page 2" on the other side.

when facing the inner page/page 1, fold the page in half (so that you face the other half of the outer page/page 2) or in one third (so that you face two-thirds of the outer page/page 2), depending on whether you want to fold it in half or fold it three times.

treat the folded page as your brochure and mark it accordingly. Write "title" on the front panel, "information" on the inner panel, etc. The specific content depends on what kind of brochure you want.

expand the page to see if the positions of various elements are appropriate. For example, your title should be on the right panel of the outer page/page 2, which means it will appear in the right column of the second page of the Word document.

8. Add text and pictures to the column. Use your sample as a reference.

9. print the test copy. If necessary, adjust the document according to the test copy.

tip if there is a standard toolbar (file, edit, view, insert ...) at the top of Word software, then you are using Word23 or earlier.

learn how your page layout will be transformed into a Word document. Because the brochure is double-sided, the Word document you finished will have two pages, one inside and one outside. A propaganda in half.