I bought a router, how to install it

1. Insert the network cable into the yellow socket (the round head socket is connected to the power supply).

2. There is a management page for this router at the bottom of the router. Open 360 Search and search for this website tplogin.cn. The first time you enter it, you will be asked to confirm your login password. After you have set the login password, the second time Once you log in, you will be asked to enter your login password.

3. After entering, click Internet settings at the bottom of the page, then click "Common Settings" at the top, click Broadband dial-up Internet access, then enter the broadband account number and broadband password given to you by the operator, and finally click Broadband Just click the save button below the password.

4. If you want to use your mobile phone to connect to wireless wifi, click the wireless settings below, click the wireless status to "on" and enter the wireless name and wireless password (there is no requirement for this, you must enter the name and password yourself) ). After completion, open the mobile phone WLAN, find the wireless name and enter the password.

5. After entering the correct account and password, go to the next step and set the basic parameters and security password of the wireless router, as shown in the figure: the wireless status is "on" and the SSID is the account number displayed when you connect to the wireless network. , you can use the default one or set one by yourself, the channel is "automatic", the mode is "11bng mixed", and the frequency band is "automatic".

The most important thing is to set the PSK password. This is something that needs to be set. If you don’t set a password, people around you can search for your wireless password and use it for free. Then it will affect Your own internet speed. The password should be more than 8 characters, preferably in the form of letters plus numbers. If it is just numbers, it is said that many software on mobile phones can automatically crack it.

6. After setting, click OK. At this point, the wireless router is set up.

Extended information:

Home settings

1. Write the IP address of the router's network management in IE (it is behind the router, usually: 192.168. 1.1) The login interface will appear. Enter the access account and password to enter the access interface of the router. Mainly set its network parameters, DHCP server and security rules to easily access the Internet. Select the "Network Parameters" option, then select LAN port parameter settings, and the following setting screen will appear. This option is mainly used to set the parameters of the router.

2. The MAC address is the MAC address of this router to the LAN, and this value cannot be changed. The IP address is the IP address of this router to the LAN. The default gateway of all computers in the LAN must be set to this IP address. It should be noted that if the IP address of the LAN port is changed, you must use the new IP address to log in to the router for WEB interface management.

And if the new LAN port IP address you set is not in the same network segment as the original LAN port IP address, the virtual server and DMZ host functions of this router will be invalid. If you want to enable these features, set them up again. The subnet mask is the subnet mask of this router for the LAN, generally 255.255.255.0. The subnet masks of all computers in the LAN must be the same as the one set here. Select "WAN Port Settings" and the following setting screen will appear, which is mainly used to set the Internet access method and permissions.

3. DHCP server settings

TCP/IP protocol settings include IP address, subnet mask, gateway, and DNS server. Correctly configuring the TCP/IP protocol for all computers in the LAN is not an easy task. Fortunately, the DHCP server provides this function. If you use the DHCP server function of this router, you can let the DHCP server automatically configure the TCP/IP protocol of each computer in the LAN for you. Select "DHCP Server" to set the DHCP server function of the router. Its setting screen

Wireless Settings

Check the physical cable: first check whether the cable is connected properly, and the corresponding Is the light flashing normally? If normal, proceed to the next step. Log in to the wireless router interface. The software designs of various brands are relatively user-friendly. It is easy to set up after entering. First set the WAN port, select PPPOE, enter the account number and password, and then click Connect. . Finally, check the connection status in the wireless router system information. If there is an IP, it means the connection is normal

If you don’t want your broadband to be blocked, you can set the wireless security password in the wireless security settings interface. Currently, the highest security level of home routers is wpa2-psk , at least 8 numbers or letters (strictly case-sensitive).

The reason for the error of the wireless router: It may be because the LAN port IP of the wireless router and the IP of the cat are the same, which may lead to the failure to dial the number (this has been seen more often in the past). It may be a problem with the ISP's settings. You can clone the MAC address of the computer's network card to the WAN port of the wireless router. If it still doesn't solve the problem, there may be a problem with the wireless routing.

Reference materials:

Baidu Encyclopedia-Router Configuration and Debugging