Installation of Baizun Wall-hung Boiler in Winter and Summer

Press the mode button of the wall-hung boiler.

First, turn on the power switch on the operation panel of the wall-hung boiler to ensure that the wall-hung boiler is turned on first. Then press the mode button of the wall-hung boiler. Generally, the sun symbol is displayed first, indicating summer mode, but it is only used for bathing in spring, summer and autumn, and it also indicates standby state in winter. Press it again, and snowflakes will appear, indicating the heating mode in winter, which can have the functions of heating and bathing, and can also realize automatic switching between heating and bathing.

How to adjust the wall-hung boiler in winter

1. First, set the wall-hung boiler to winter mode according to the steps. When heating in winter, turn the bathroom knob to raise the temperature clockwise and lower the temperature counterclockwise. The liquid crystal display shows the temperature value of sanitary hot water, and the bathroom icon flashes.

2. After the setting is completed, the wall-hung boiler will automatically save the setting, and the display screen will automatically return to show the heating outlet temperature in the current running state, so as to ensure that the wall-hung boiler can run in the heating state in winter.

3. Then turn on the hot water tap, and the wall-hung boiler will automatically switch from the heating state to the sanitary hot water state. The wall-hung boiler will run in the sanitary hot water state. When the hot water tap is turned off, the wall-hung boiler will automatically switch from the sanitary hot water state to the heating state. In this way, you can be sure that it has been set successfully.

Why does the wall-hung boiler need to switch between winter and summer modes?

It is cold and dry in winter, and wall-hung boilers play an important role in creating a comfortable and healthy living environment for families. Wall-hung boilers have two functions when used in winter: heating and providing domestic hot water.

Because the indoor temperature needs to be adjusted according to the outdoor temperature, the wall-hung boiler cooperates with the temperature controller, which saves the trouble of repeatedly turning the button on the front of the wall-hung boiler. The temperature controller can display the temperature of the room and the required temperature, and can set the temperature freely while saving energy effectively.

After winter, when heating is not needed, the wall-hung boiler is mainly responsible for providing domestic hot water. For the sake of energy saving and safety, it is suggested that the hot water temperature should not be set too high in summer, and exceeding the upper limit of high temperature protection will also cause harm to the wall-hung boiler. Water pipes must often be subjected to hot and cold tests. Although special pipes are used, it is recommended to set the high temperature below 64°C, which can also effectively prevent scaling.

When the wall-hung boiler is turned on in summer mode, it is necessary to keep the water pipe full of water to keep the water pressure normal. Because the heating of the wall-hung boiler is a closed system, if water is discharged, the wall-hung boiler is likely to be burned out because the water pressure is too low. In addition, the water in the radiator should not be changed frequently.

For the first time, because there are many impurities in the radiator, it can be released after one year of use and then injected with new water. Then it can be changed every few years, otherwise the water and alkali brought by each change will lead to scale accumulation, which will eventually lead to the failure of the radiator, which is not worth the candle.