Weather forecast 7. 16

Fire card, please upgrade the system kernel to 1.4X, 1.4x system support card with automatic DIDL patch. The following self-made software was tested on the 1.4x system, and it can run normally on the cassette after successful testing. ..

DSTT Please note that the DSTT kernel has an automatic DIDL patch. Homemade software can be compatible. Whether the following self-made software is forced to install the fire card of automatic DIDL patch.

At present, only the following software needs to be indicated in the test results:

The weather forecast DSWeatherReport _ V0.5 runs on a white screen.

The software DS Mouse 0.3 a, which turns NDS into a wireless mouse, is unstable and the command is sent incorrectly.

You can make NDS into a USB handle. DSPad Tilt only corresponds to the firewire card, and DSTT cannot identify the firewire programming device of SLOT-2.

Huoka 1.23 O kernel correspondence: USB handle program, USB handwriting mouse program. DSTT can't run because of SLOT-2' s identification method of firewire programming equipment (originally, these two softwares were only developed for firewire cards).

In the future, before publishing software posts, I will use colored words to indicate whether I have tested the software on the card. For the untested software, I hope you can help me test it. If you have any questions or comments, please return to the post.

Special note: If it is a relatively small attachment, please be sure to download it by the download method that comes with WINDOWS. For the files uploaded to the forum space, that is, the files with underlined clicks, you can use download tools such as Thunder, otherwise you can't download them!

Finally, to be clear, I don't write my own homemade software. These homemade softwares are available in various forums and other places.

New evaluation system:

1. Each software to be tested will have a star, of which ★ is one star, ☆ is half star, and the maximum is 5 stars.

2. Every tested software will write about its shortcomings, and there is nothing to write about its advantages, because it will be in the general introduction.

ROM download

ROM of games such as SFC FC MD, please download it here.

/

If you encounter software problems, please send me a short message in the forum, and please reply if there are major bugs or problems.

Software floor index:

Page 1

Floor 1: (updated in 10. 14) SFC simulator SNEmulDS 0.6 alpha for NDS!

Layer 2: Overview of the Moon Shell

3rd floor: [NDS electronic dictionary] NDSDict0.50* input method BUG correction.

4th floor: release Dsmplay08! ! (Moonlight's latest work) 9/ 15 Update NDS highest HD playback software.

5th floor: [1 1.02 update] The best drawing software color! Version 1.06h

6th floor: The release of self-made web browser DSHobro 0.3 opened the door of NDSL network.

7th floor: WEEE Basic ALPHA 2, a program written in Basic language.

8th floor: Dorganize 3.1129NDS powerful PDA software.

9th floor: (updated on 7. 16) GB/GBC simulator on Lameboy v0.9-NDS, and the simulation effect is good. The new version supports sound.

Floor10: (updated 9.10) NDS Read ComicBookDS V3.0.

1 1 building: [10. 19 update] See the comic tool ImageViewer 20071017 ver10.

12 layer: NDS omni-directional detection software diagnosis

Floor 13: DSPad is tilted, and NDS is used as USB handle.

14 layer: FC simulator nesDS

Update file manager DSFile2.

16 layer: Chinese teaching software ds zhongwen v1.0b.

17th floor: update Wifi backup tool NDS backup tool Wifi v0. 1b on August 4th.

Floor 18: the browser software Okiwi updates Okiwi Alpha 0.2.

Floor19: (65438+updated on February 24th) RENO STUDIO XMAS(reno memo 2.7), a Chinese and English all-around notebook, was released by NB Development Group!

page 2

20th floor: DSMasterPlus, SEGA SMS simulator

2 1 Building-24th Floor: Download+Tutorial of DS Fire Chain Mainstream Simulator

25th floor: NewDictS v0.7r Bread Dictionary Instruction Download.

26th floor: The unofficial version of DSFTP 2.4.2 supports IDS/IDSL and long Chinese file names.

27th floor: NDROM multifunctional tool v 1.69 front end [PC]

28th floor: self-made software-morning timer Ver 1.04 released! (DS alarm clock made by moonlight) 1 1/27 update

29th floor: Cooking timer 1.0 released!

30th floor: DSM mouse 0.3a, a software that turns NDS into a wireless mouse.

Building 3 1: a powerful PDA software DSBLUE

32nd floor: excellent domestic book software Dolphin Reader v0.2 BETA released.

33rd floor: NDSWebRadio v0.3 NDS network radio.

Floor 34: Record Card Archiving Tool (2007. 12.4 Revision V 1. 1) (PC)

35th floor: NDS Header Tool V 1.7 Chinese version (PC)

36th floor: NDS game BGM extraction software VGMTrans

37th floor: Rominator 5.3 (PC), NDS ROM management tool.

38th floor: AVI player Tuna -viDS

39th floor: NGP/NGPC simulation on NDS!

Page 3

Fortieth floor: DS weather forecast DSWeatherReportV0.5 updates the query mode of China weather forecast.

Building 4 1: VoIP software SvSIP on NDS

42nd floor: WonderSwan simulator WonDerS.v 1. 1 on the DS.

Executed by & Xiaoxing 2007-08-02 16: 19

This software has been tested and runs normally on the DS FIRE LINK card!

Instructions for use: after decompression, bake SNEmulDS.nds into the cassette, create a folder of SNES under the root directory of the memory card, and put the ROM in this folder so that the emulator can recognize the ROM. When using, please keep other settings as default except 1.

Software shortcomings: there are still bugs in mapping, sound effects, opening animation playback, etc.

[Attachment =25303]

SNEmulDS 0.6 alpha!

Performer & Xiaoxing 2007-08-02 16:33

MoonShell 1.7 1 Chinese Fool Edition +MoonShell Chinese Modified Edition+DPG Tools1.3/modified Edition +4 sets of MS Skin +moonshell Theme Editor PhLeon Beta V3+EZBuilder 2007++V1.50.

This software has been tested and runs normally on the DS FIRE LINK card!

Instructions for use: After decompression, copy the moonshl folder to the tape.

Use of converter (DPGTOOLS 1.3 1): After decompression, find dpgenc.exe and run it.

Software defect: Up to now, DS FIRE LINK still does not support the soft reset function of 1.7 1.

Lunar shell Chinese revised edition

In fact, there has long been a completely Chinese version on the Internet, based on MoonShell 1.5. It was released in NDSMAN, and then someone made a fool's edition. This version adds several play plug-ins on the basis of the original release version, and the DIDL patch is forced (the automatic DIDL patch on the card has no effect), and the running test is passed.

By the way, this version of the player supports synchronous LRC lyrics display. Please name the lyrics file and the song file with the same name, for example:

123.mp3

123.lrc

You can use external lyrics.

Support reading e-books while listening to songs

E-books need L+R reset.

Support soft keyboard

This version can only use two special skins, which have been integrated in the fool package, of course, the background can still be replaced.

The alternative is to delete or rename the Default folder in shell\Skins, and then change the Vista folder to default.

The decoding formats have been updated to 20, and all DPG formats can be used except DPG3 dedicated to 1.7 1.

It is often reported that the DPGTOOLS 1.3 1 converter cannot convert files normally. Here is a revised version for you to download.

In order to meet everyone's needs for skin, here are 4 sets, which are explained in the compressed package.

DPGTOOLS 1.3 1

The decoding speed of DPG is accelerated.

Start key can be set to soft reset or view debugging information, and this option is added in [System2] item of environment settings.

OGG encoded DPG files can be played at twice the audio sampling rate.

Version1.71+1August 22, 2007

The main body of the lunar shell has not changed. The subject has not changed.

The DLDI patch file has been updated. The new DLDI has been updated to support several other cards burning.

DPG tool is updated to DPG tool 13 1. The DPG tool is updated to version 13 1.

The MDX/MIDRCP/JpegAccu plug-in has been updated. Updated three plug-ins of mdx/midrcp/JPEG accu.

Moonshell theme editor Phleon Beta v3

Beta V3:

RAM has been greatly optimized

* Fixed the fault of scrolling graphics.

* Fixed the file selection of things like Alpha, the real lunar shell.

* Replaced the stupid background picture

The author also modified the theme editor of the lunar shell. In this revision, the author changed some ugly background pictures, corrected the burr when scrolling graphics, and optimized RAM.

Click me to view Yyjoy Software Group's own Moonshell theme-PhLeon Batev3 tutorial.

[Attachment =25306]

Moonshell _ fire _ link _1.75438+0 Chinese Fool Edition

Moonshell _ dstt _1.75438+0 Chinese Fool Edition

Lunar shell Chinese revised edition

DPGTOOLS 1.3 1 official converter version

Moon shell skin

Moonshell theme editor Phleon Beta v3

Ppn group-erspicu-ez builder 2007++v1.50beta2-more users try more.

Click to download ezbuilder 2007++1.50beta2.

Click to download a short video tutorial.

Click to download the composition tool (NDS DPG2 conversion is not required, and PSP MP4 format conversion is used).

The converter needs all kinds of software support. If conversion is not possible, please install the following software. (Storm Video 1 generation decoding package type is generally not needed after installation. )

1, K-Lite Mega codec package encoder integration

2. Avisynth version 2.5.6a (if it cannot be converted, please try to install this software first).

3. Real substitution (supported by RMVB)

Tutorial: moonshell Changing Fonts

The default font size is 12, please do not modify it! After the change, I can't recognize it in the original MS!

After running, select CP936. TXT, and then set the Ank font (English font) and Unicode font (Chinese font). Please install the artistic font you want to use in the system!

In the font preview, an English word and a Chinese character will be displayed. Set the offset between AnkY and UnicodeY to center the word vertically!

Then click Generate! The generated three font files are all in the CP936 directory! Wish you success!

The interface is as follows:

[Attachment =27907]

Preview of usage effect (English font: Chinese block letters, Chinese font: Xiao Yuan):

[Attachment =27908]

The following attachments are software.

[Attachment =27909]

Performer & Xiaoxing 2007-08-02 16:39

This software has been tested and runs normally on the DS FIRE LINK card!

Instructions: After decompression, copy the whole Dict folder to the cassette.

Software defect: Not yet.

NDSDict0.50* input method BUG correction, crash bug correction, support for traditional and simplified font replacement, and increase Japanese voiced and semi-voiced input *

[Attachment =25307]

[Attachment =25308]

[Attachment =25309]

[Attachment =253 10]

[Attachment =253 1 1]

Software introduction

Thanks to Hu Li Hutu, without his previous work (the framework of English-Chinese dict, the display of Chinese characters, and the realization of pinyin input method, it can be said that he completed the core part), there would be no NDSDict now.

Thanks to Phillips, the new version uses his font file and modifies the character display with reference to his code. In the process of writing, I had a lot of communication with him and benefited a lot.

Thanks to ffsky, he has done a lot of testing work. Without his test, there would be no new NDSDict version released.

Thanks to Hu Zheng, it is his stardict open source project that provides a large number of dictionary files for NDSDict.

The original plan is to write a small program on the computer side to preprocess the index file, and at the same time transform the pinyin input method to completely separate the pinyin thesaurus. But because I have to start writing a paper, I have no time. Now I stop upgrading. But I think this thing has basically taken shape. In addition, Phillips is making his dictionary version, which will be perfected soon. At that time, you can use his version to reveal that his input method module is very good, and you can directly input Japanese hiragana with the keyboard. I believe that GUI is also worth looking forward to.

There may still be a problem with pinyin input. Please send me a message if you test it. Although there is no new version released now, I corrected the small bug of input method in time.

I won't reprint the updated instructions. ...

Using DLDI interface, in principle, all burning cards are supported, and you need to patch DLDI yourself.

Support pinyin input and Chinese character query.

Up to ten dictionaries are supported, and dictionaries can be switched at any time during use. The dictionary file name should be no more than 32 characters (two characters for one Chinese).

How to use:

Please create a Dict folder in the root directory, and then put all Dictionary files, including voice-related files (voice.raw, voice.idx) in the dict folder.

Version 0.50, please copy the Unicode.fon and HZK 12.fon files in the compressed package to the Dict folder, otherwise 0.48 cannot be used.

Dictionary files in Dict folder can be changed at will, but the software can only identify the top ten dictionaries.

Please note that each dictionary includes three files *. ifo，*。 Idx and *. Dict, these three are indispensable. In addition, for some Chinese-English dictionaries, the suffix names of dictionary files need to be changed to *.c.ifo, *.c.idx and *.c.dict to be used normally.

When using, you can press the Select key to pop up help.

The following figure shows the handwriting recognition method, and the small black dot in the figure is the starting point when writing. This will add help in the next version.

[Attachment =25335]

Software packages and downloads (including dictionary files and pronunciation files)

Performer & Xiaoxing 2007-08-02 16:53

This software has been tested and runs normally on the DS FIRE LINK card!

Instructions for use: Open the "MakeNDSROM.exe" in the attachment, then generate a bunch of files and copy "DSM lay07 _ DLMS _ Moon _ DSLink (micro SD card)". NDS "and" dsmlay07 "folders to the root directory of the memory card!

After starting the program, it will automatically detect the DSM available in the memory card (the DSM of M3 will not be recognized).