What is a drip tank? On the Difference of drip line in Drip Tank

The weather is unpredictable. When the weather is sunny, most people like sunny days. When it rains, dark clouds are gathering, which makes people very unhappy. In contrast, rainy days do bring inconvenience to people's lives. For example, if rain drops on the eaves, it will penetrate into the wall and cause damage to the wall. In order to avoid this situation, people will install a drip tank on the windowsill to let water flow into the sink, but many people don't know what a drip tank is. Let's explain it in detail.

What is a drip tank?

Drip tanks are generally used at the lintel of cement mortar or anti-crack mortar. The depth and width specifications are generally 8- 12mm, and the position is generally 20-40mm away from the external surface of the facing. The location and size of the drip tank in the unit project should be unified, and the width of the hole passing through the doors and windows should be consistent. In the past, wooden millimeter strips were used to paste and paint the base layer, and the surface layer reached the strength to form laths. However, due to many working procedures and high requirements, millimeter strips have been replaced by plastic U-shaped mosaic wires. The plastic U-shaped embedded wire used in the construction site is usually only 10*5mm, and its depth and width cannot meet the requirements >; = 10mm requirements, it is not uncommon for high-rise external doors and windows to leak around the frame due to climbing water during the storm.

The difference between a drip tank and drip line.

Drip line is made into a triangular eagle mouth, and the water tank is made into a groove along the mouth, one protruding and the other recessed to prevent rainwater from flowing back into the mouth. Now it is basically required to make concave drip tanks everywhere.

When it comes to building construction, ordinary people in drip line don't know what it refers to, but such drip line plays an indispensable role in building function. Without it, all fa? ades generally have parapets, openings for external doors and windows, and decorative waistlines for external walls. Due to the accumulation of dust in the air, the walls are polluted. Without it, when it rains, water will climb over the lintel, causing water leakage in doors and windows.

Therefore, whenever rain washes the outdoor facade (including wall, parapet coping, balcony modeling, doors and windows, waist line, etc.). ) and then flow down the facade, drip line (trough) must be set to cut off the water flow, so that the water drips downwards, so as not to enter the room or affect the decoration effect.

In fact, the drip tank is to prevent the water from turbulence and damaging daily necessities. Drip tanks are best installed in some rainy areas. Although both drip line and sink are used to receive water, their structures are different, and they need to be selected according to different windowsills. Have their own characteristics. Before buying, we should know the difference between them so as to use them more conveniently and better. The scope of drip tank is more and more extensive, and people can learn more.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~