How to use Konka air cooler?

1. First use: After the machine is installed, the manufacturer will start the air cooler after debugging and cleaning.

2. Turn on the air cooler: first turn on the fan switch, and the fan will start to supply air; Then start the cooling and blade swinging functions. The frequency converter can adjust the wind speed as needed. Do not turn on the exhaust function under normal circumstances (it can be turned on when the indoor air quality is poor, and the wind speed is recommended to be controlled within 15). When the ventilation function is turned on, there is no need to open the tuyere to swing the blades. When switching between air supply and exhaust functions, wait for the fan to stop rotating before pressing the key. Winter: It is recommended to close the water inlet valve, drain the water from the bottom basin (press the cleaning button for 3 minutes), and do not turn on the refrigeration function.

3. Electric tuyere: The inner louver of the tuyere can swing the air from left to right at a large angle, and the outer louver can adjust the orientation of the grid according to the up and down direction of the workstation.

4. Open doors and windows: Please keep a certain number of doors and windows open during the use of the air cooler. For personal and machine safety, please don't turn on the air cooler in a completely closed space.

5. Turn off the refrigeration function: Turn off the refrigeration function in the following circumstances: rainy days, poor water quality, low outdoor temperature or other times when it is not necessary to turn it on.

6. Cleaning principle: In general, it is cleaned once every 3-7 days. The cleaning cycle should follow the following principles: when there is a lot of dust around the air cooler, clean it every 1-2 days; When the weather is dry (for example, it doesn't rain for a long time, and it continues to be hot). ), should be cleaned once every 2 days; If the air cooler has not been used for a long time, it should be drained and cleaned first when it is used again; When there is an unpleasant smell, clean the air cooler immediately. Don't use the air cooler or refrigeration function in winter, and don't clean the air cooler.

7. Cleaning step: Turn off the "refrigeration key" first, then press the "cleaning key", turn off the "cleaning key" after about 3 minutes, and turn on the "refrigeration key" after 3 minutes (let the water fill the bottom basin). If necessary, you can repeat the above steps again.

8. Don't turn on the cooling function of the air cooler/ambient air conditioner in rainy season to reduce the humidity in the air. Or, please buy a thermometer and choose whether to turn on the cooling function of the air cooler according to the ambient humidity. That is, when the relative humidity in the air is higher than 70%, it is recommended not to turn on the water pump.

9. Maintenance: When it is not used for a long time, close the water valve, clean and drain the remaining water in the cabinet, unplug the power plug, wipe the shell clean and cover it with a dust cover.

Friendly reminder of Hao Shuang Refrigeration Editor: Please do not disassemble the electric control switch and waterway system without permission. Please contact the company in any of the following situations: tripping, pungent smell, water and electricity line failure (bare wire, broken water pipe, etc. ) or other dangerous situations.